Panasonic Viera TH-P54S20A Operating Instructions Manual

26Menu Item Adjustments / Configurations (alternatives)SetupPC SetupInputResolutionSwitches to a wide viewVGA (640 × 480 pixels), WVGA (852 × 480 pixels),● XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)Options change depending on signals●Clock Set to the minimum level if noise occurs.H-posAdjusts horizontal positionV-posAdjusts vertical positionClock Phase Eliminates flicker and distortionAdjust after Clock adjustment● ● Set to the minimum level if noise occursSyncPC sync signal type (H & V / SOG)H & V : by the horizontal and vertical signals from your PCSOG : Sync on Green sync from your PCResetPC Settings Press the OK button to reset the present PC Setup settings to the default.DVI Position Setting H-pos Adjusts horizontal position settings of DVIV-pos Adjusts vertical position settings of DVIReset DVIPositionSettingsPress the OK button to reset the present DVI Position settings to thedefault.Off Timer Sets the time the TV automatically goes to Standby mode(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) (p. 13)Child Lock Locks a channel / AV input to prevent access to it (p. 32)Tuning MenuFavouritesEdit Creates list of favourite channels (Digital TV mode) (p. 29)Channel List Skips the unwanted channels or edits channels (p. 29, 31)Auto Tuning Sets all Digital TV or Analogue TV channels automatically (p. 30, 31)Manual Tuning Sets the TV channels manually (p. 30, 31)UpdateChannel List Updates the channel list with keeping your settings (Digital TV mode) (p. 30)New ChannelMessageSelects whether to give a notification message when a new channel isfound (Digital TV mode) (Off / On) (p. 30)SignalCondition Checks the Digital TV signal condition (p. 30)Add MPEG-4AVC ChannelsActivates the reception of MPEG-2 and MPEG-4 AVC channelsUse this function if MPEG-4 AVC services start in your area.● All previous tuning setting are erased.● Once activated, this option is removed from the Digital TV Tuning Menu.●Display SettingsTeletext Teletext display mode (TOP(FASTEXT) / List) (p. 17)Side Panel Increases the brightness of the side panel (Off / Low / Mid / High)The recommended setting is “High” to prevent panel “image retention”.●Input Labels Labels or skips each input terminal (p. 33)BannerDisplayTimeoutSets how long the information banner stays on screen (p. 14)(0 (No display) / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 seconds)Playing TimeDisplaySet to “On” to display a continuous record of time spent using Game modeevery 30 mins (Off / On)● This function is available when “Game” is selected in “Viewing Mode” (p. 24).