Panasonic Viera TX-26LXD600A Operating Instructions Manual

Contents

24 25AdvancedMain menuPicture menuSound menuSetup menuHDMI settingOff timerOwner IDShipping conditionSetup menuTuning menu AccessOffTeletext TOPProgramme editAuto tuningManual tuningVolume correctionTuning menu AccessIDTVR G Y BDVBAnalogue1Manual tuning-, + : SearchTV / AV : Programme change modeSTR : To storeF : To exitSTR F -STR F - / + / TV / AVMENUDVBAnalogue(Press repeatedly until"Tuning mode" appears)or (Access "Manual tuning")(Programme change mode, Search mode)or (Change programme, Start searching channels)(Store)- (Repeat)Editing and Setting ChannelsSelect "Setup menu"Select "Tuning menu"423Select the function5Display the menu6 SetEditchannels■ Delete■ Add■ Move■ Changename■ Lock■ SkipProgrammeeditFor Manual tuning, usingthe buttons on the TV("Tuning mode" on p. 7)SetautomaticallyAuto tuningSetmanuallyManualtuningThe current channel settings can be changed according to your needs and reception conditions.■ To return to TV(Analogue mode)Manual tuning1ExitSearch down/upReturnDirect entryStore0 9Select the programme numberand search through the channelStoresearchProgrammenumberChannelRepeat andNote• If a VCR is connectedwith only the RF cable,select programmenumber "0".• The programmenumber blinks.To freely change settings after Auto tuning• Editing and Setting Channels(Analogue)• All previous settings are erased.• When the sequence is completed, the broadcast of programme number "1" will appear.• If you want to return to the factory settings (Analogue channel pre-tuned), perform “Shipping condition” (p. 36).ExitReturnStart TuningAll analogue tuningdata will be erasedWARNINGStart Auto tuningsetAutomatically set the channels received in the areaAUTO TUNING IN PROGRESSSEARCHING : PLEASE WAITExitReturn1Settings are made automatically■ To exitEXITProgrammenumber(flash)Channelaccessselectaccessselectaccess or setselectSTR F TV/AV1 Select Analogue modeVolumeadjustmentVolumecorrectionFor the small adjustments for the volume of an individual channelSelect the channel you want to adjust Set this functionProgramme editProg. Name Lock Skip1 :2 :3 :4 :5 :OffOffOffOffOffOffOffOffOffOffABCXYZFTP123456Programme editProg. Name Lock Skip1 :2 :3 :4 :5 :OffOffOffOffOffOffOffOffOffOffABCXYZFTP1234563 FTPABCDEFGHIJKLMNOPQRSTUVWXYZ+- . 0123456789Programme editProg. Name Lock Skip1 :2 :3 :4 :5 :OffOffOffOffOffOffOffOffOffOffXYZFTP123456■ To change the name of the broadcasterdisplayed when selecting channelsUsable charactersSelect the"Name" fieldSelect thecharacterTo nextcharacterRepeatStore■ To lockselectCursorSelect the "Lock" fieldSelect "On"("Off" to unlock)Select the programme number to editProgrammenumberNameEdit• You cannot select the channel with numberbuttons when locked.■ To delete RAfter confirming, press R■ To add GAfter confirming, press G■ To move YSelect destination Y• This function is only effective when pressing theProgramme number up or down button either onthe TV or on the remote control.Programme editProg. Name Lock Skip1 :2 :3 :4 :5 :OffOffOffOffOffOffOffOffOffOffABCXYZFTP123456■ To skipSelect the "Skip" fi eldSelect "On" to skipthe channel