Advanced25• Tuning ProgrammesSetprogrammemanuallyManualTuning1 BBC1CH33Manual TuningSound SystemManual Tuning 1 120Fine Tuning5.5MHzColour System AutoCH33■ Fine TuningUse to make small adjustments to the tuning of an individual programme (affected byweather conditions, etc.)■ Manual TuningSet programme manually after Auto Tuning.• Set Sound System and Colour System, and then perform this function.Normally set Colour System “Auto”.• If a VCR is connected only with the RF cable, select programme position “0”.storesearchSearch and storeSelect the programmeCHSelect the programme position1 324 657 980Set allprogrammesautomaticallyChannelSelectionAuto Tuning Auto Tuning2Scan 1 120CH4EXITEXITRETURNStart Auto TuningAll tuning data will be erasedAuto TuningOKAccess “Auto Tuning” Settings are made automatically• All the previous tuning settings are erased.• When the operation is completed, the programme at programme position “1” will bedisplayed.• If tuning has not been done completely “Manual Tuning”Automatically retune all programmes received in the area.• If a Child Lock PIN number (p. 26) has been set, it must be entered.Select the Channel Selection method (Position / Direct)■ Position■ DirectExampleWhen Channel Selection is on Position,and Auto Tuning is performed, the TVmemorises the programmes tuned in orderfrom Programme Number 1.During Position mode various receptionprogrammes can be viewed.ExampleWhen Channel Selection is on Direct,and Auto Tuning is performed, the TVmemorises the Programme Number whichis the same as the programme tuned.The Channel Display numbers for thebroadcast stations in each region are listedon p. 38.Programme Number Channel Display Received Programme12345678910–2–4–6–8–10–2–4–6–8–10Programme Number Channel Display Received Programme1234567891024681012141618202468101214161820Start Auto Tuning• To return to TV F■ For Auto Tuning, using the buttons on the side of the TV (p. 7)Press repeatedly until “Auto Tuning” appearsFAccess “Auto Tuning”TVStart “Auto Tuning”TV