7Quick Start GuideMULTI WINDOWOPTION SD CARDEXITRETURNINPUTDIRECT TV RECN• Identifying Controls• Accessories / OptionsCursor buttons• Makes selections and adjustmentsStandby On / Off switch• Switches TV On or Off standbySound Mute• Switches sound mute On or OffAspect (p. 14)• Changes aspect ratio from Aspect Selection list• Also possible by pressing this buttonrepeatedly until you reach the desired aspectProgramme Up / Down• Selects programme in sequenceTeletext (p. 15)• Switches to teletext modeOK• Confirms selections and choices• Press after selecting programme positionsto quickly change programmeVCR / DVD Panasonic equipmentoperations (p. 21)Volume Up / DownProgramme Information (p. 13)• Displays programme informationIndex (p. 17)• Returns to the teletext index page(teletext mode)Coloured buttons• Used for the selection, navigation andoperation of various functionsExit• Returns to the normal viewing screenDirect TV Recording (p. 43 and p. 45)• Records programme immediately inDVD Recorder / VCR with Q-Link orVIERA Link connectionNumeric buttons• Changes programme and teletext pages• When in Standby mode, switches TV OnVIERA Link Menu (p. 45)• Press to access VIERA Link Menu directlyGuide (p. 18)• Displays TV GuideOption Menu (p. 13)• Easy setting for viewing and soundoptionsMain Menu (p. 22)• Press to access VIERA Link, Picture,Sound and Setup MenusSubtitles (p. 12)• Displays subtitlesSurround (p. 24)• Switches Surround soundInput mode selection• TV - switches DVB / Analogue mode (p. 12)• AV - switches to AV input mode from InputSelection list (p. 20)SD Card (p. 40)• Switches to SD Card viewing modeReturn• Returns to the previous menuHold• Freeze / unfreeze picture (p. 12)• Holds the current teletext page (teletextmode) (p. 17)Normalize (p. 23)• Resets picture and sound settings to theirdefault levelsTVRemote ControlIdentifying ControlsC.A.T.S. (Contrast Automatic Tracking System) sensor• Senses brightness to adjust picture quality in “Eco” mode in Picture Menu (p. 24)Mains power On / Off switch• Switch On to turn on the TV or turn the TV to standby mode by the remote controlChanges theinput modeRemote control signal receiverTimer LED• Active for Timer Programming or Standby for Direct TV Recording :orange (flash)Timer Programming On :orangeIncreases or decreases the programmeposition by one. When a function isalready displayed, press to increase ordecrease the selected function. Whenin Standby mode, switches TV On.Function select• Volume / Contrast / Brightness / Colour / Sharpness /Tint (NTSC mode) / Bass / Treble / Balance / Auto Setup (p. 32)SD Card slot (p. 41)Headphonesjack (p. 48)AV3 terminals(p. 48)HDMI3 terminal(p. 48)Power LED• Standby: redOn: green• When using the remote control, indicates the TV has received a command.Swing door to open