Panasonic Viera TX-37LZ800A Operating Instructions Manual

5(Cleaning an energized TV may cause electrical shock.)When cleaning the TV, remove themains plugCautionNotesMains plugWipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fire or electrical shock.)MaintenanceFirst, remove the mains plug from the socket outlet.Display panelRegular care: Gently wipe the surface clean of dirt by using a soft cloth.Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutraldetergent by 100 times of water. Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.Caution• The surface of the display panel has been specially treated and may be easily damaged.Do not tap or scratch the surface with your fingernail or other hard object.• Use care not to subject the surface to bug repellent, solvent, thinner, or other volatile substances(this may degrade surface quality).CabinetRegular care: Wipe the surface clean using a soft dry cloth.Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent.Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.Caution• Use care not to subject the TV's surfaces to detergent.(A liquid inside the TV could lead to product failure.)• Use care not to subject surfaces to bug repellent, solvent, thinner, or other volatile substances(this may deteriorate the surface by peeling the paint).• Do not allow the cabinet to make contact with a rubber or PVC substance for a long time.Blocked ventilation by curtains, etc. maycause overheating, fire or electrical shock.Do not block the rear air ventsWhen TV will not be used for along time, remove the mains plugThis TV will still consume some power evenin the Off mode, as long as the mains plug isstill connected to a live socket outlet.Electronic equipmentIn particular, do not place video equipment near theTV (electromagnetic interference may distort images/ sound).Equipment with an infrared sensorThis TV also emits infrared rays (this may affectoperation of other equipment).Keep the TV away from these equipmentAdjust the LCD panel to your desired angleEnsure that the pedestal does not hang over theedge of the base even if the TV swivels to the fullrotation range.Do not place any objects or hands within the fullrotation range.15° 15°ba(View from the top)If no signal is received and no operation isperformed in TV mode for 30 minutes, the TV willautomatically go to standby mode.Auto power standby functionTransport only in upright positionIrreversible damage can be caused.Do not expose your ears to excessivevolume from the headphonesWhen using the pedestal, keep the space betweenthe bottom of the TV and the floor surface.In case of using Wall-hanging bracket, follow the manual of it.a: 464 mm / b: 381 mmSet the mark at the centre as illustrated,to have the swivel positioned at thecentre of the rotation angle.Allow suffi cient space around theTV for radiated heat101010 10(cm)Minimum distance