Panasonic Viera TX-40CX802B Operating Instructions Manual

Contents

Panasonic Viera TX-40CX802B Operating Instructions Manual Manual pdf 16 page image

English16First time Auto SetupWhen the TV is turned on for the first time, it willautomatically search for available TV channels and giveoptions to set up the TV.● These steps are not necessary if the setup has beencompleted by your local dealer.● Please complete connections (p. 9 - 12) and settings(if necessary) of the connected equipment beforestarting Auto Setup. For information about the settingsfor the connected equipment, read the manual of theequipment.1 Plug the TV into a live mains socketand turn the power on● Takes a few seconds to be displayed.2 Select the following itemsSet up each item by following the on-screen instructions.Example:Please select your viewing environment.Home Shop■ How to use the remote controlMove the cursorAccess the item / store the settingReturn to the previous item (if available)Select [Home]Select [Home] for use in a home viewing environment.● [Shop] is for shop display.● To change the viewing environment later on, the setwill need to have all settings initialised by accessingShipping Condition.Set up the network connectionSelect your country● Auto Setup screen varies depending on the countryand the signal mode.● [Satellite Antenna Setup]Ensure the satellite connections are completed(p. 10) and select the tuner mode ([Dual Tuner] /[Single Tuner]).Select your regionAuto Setup is now complete and theTV is ready for viewing.If tuning has failed check the Satellite cable, RF cable,and the network connection, and then follow the on-screen instructions.Note● The TV goes into Standby mode when no operationis performed for 4 hours if [Auto Standby] in the TimerMenu is set to [On].● The TV goes into Standby mode when no signal isreceived and no operation is performed for10 minutes if [No signal Power off] in the Timer Menuis set to [On].● To retune all channels[Auto Setup] in [Tuning Menu] (Setup Menu)● To add the available TV signal mode later[Add TV Signal] in [Tuning Menu] (Setup Menu)● To initialise all settings[Shipping Condition] in [System Menu] (SetupMenu)