Panasonic Viera TX-L32CX3E Operating Instructions Manual

Contents

Link Functions (Q-Link / VIERA Link)59Q-LinkPreparationstConnect the DVD Recorder / VCR with the following logos :“Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC (a trademark of Metz Corporation)”, “Easy Link (a trademark of Philips Corporation)”,“Megalogic (a trademark of Grundig Corporation)”, “SMARTLINK (a trademark of Sony Corporation)”tQ-Link connection (p. 57)tUse fully wired SCART cable.tSet up the DVD Recorder / VCR. Read the manual of the recorder.tQ-Link terminal setup in the Setup Menu [AV1 out] (p. 30)tDownload preset - channel, language, country settings “Preset download” (see below)Features availablePreset downloadChannel, language, country settings can be downloaded to the recorder.tDVB-C channel settings cannot be downloaded.tTo download settings[Download] (p. 30) or [Auto Setup] (p. 35) or “Auto Setup” - when first using the TV (p. 12, 13)Direct TV Recording - What you see is What you recordRecording the current programme in DVD Recorder / VCR immediately.RETURNjklghi mnotuvpqrs wxyzabc defMENU NASPECTINPUTTV AVSD CARDOPTIONINDEX HOLDSTTLTEXTEXITDIRECT TV REC DIRECT TV RECtAvailable conditions :Picture source Mode Recording fromAnalogue TV TV monitor outAV Recorder’s tunerDVB TV TV monitor outAV (watching recorder’s tuner) AV Recorder’s tunerAV (watching recorder’s external input) AV Recorder’sexternal inputAV (watching TV’s external input) AV TV monitor outtWhen Direct TV Recording is performed, the recorder is automatically turned on if it is inStandby mode.tChanging channel or turning off the TV is available while the recorder is recording from itsown tuner.tChanging channel is not available while the recorder is recording from the TV tuner. To stop recordingUnlock the tunerTuner LockedPress EXIT to unlock and stop recordingEXITPower on link and Easy playbackSet Power on Link [On] in the Setup Menu to use this function [Power on Link] (p. 30)When DVD Recorder / VCR starts playback or direct navigator / function menu for the equipment are activated, the TV is turnedon and input mode is switched automatically so that you can view the content. (Only when the TV is in Standby mode.)Power off linkSet Power off Link [On] in the Setup Menu to use this function [Power off Link] (p. 30)When TV is set to Standby mode, the recorder is also automatically set to Standby. (Only when the videocassette or disc is notactive.)tThis function will work even if the TV enters Standby mode automatically by auto power standby function.NotetSome recorders are not applicable. Read the manual of the recorder.