Panasonic Viera TX-L32E30Y Operating Instructions Manual

Also see for Viera TX-L32E30Y: Service manual

Contents

How to Use Menu Functions33Menu Item Adjustments / Configurations (alternatives)SoundSPDIF SelectionSPDIF : A standard audio transfer file formatSelects the initial setting for digital audio output signal from DIGITAL AUDIO OUT andHDMI2 (ARC function) terminals [Auto] / [PCM][Auto] : Dolby Digital Plus, Dolby Digital and HE-AAC (48 kHz) multi-channel are outputas Dolby Digital Bitstream.MPEG is output as PCM.[PCM] : Digital output signal is fixed to PCM.• For DVB mode, network video contents (p. 77) or Video mode of Media Player (p. 63)• ARC (Audio Return Channel) : A function of digital audio output using HDMI cableHDMI1 / 2 / 3 / 4 InputSelect to fit the input signal [Digital] / [Analogue] (p. 96)[Digital] : HDMI cable connection[Analogue] : HDMI-DVI adaptor cable connection• HDMI input mode onlySPDIF DelayAdjusts the delay time of the sound output from DIGITAL AUDIO OUT and HDMI2 (ARCfunction) terminals if the sound does not synchronize the image• DVB mode onlyReset to Defaults Press the OK button to reset the present Sound Mode, [Balance], [Headphone Volume]and [Surround] to the default settingsTimerTimer Programming Sets a timer to remind watching or record forthcoming programmes (p. 44)• DVB mode onlyOff Timer Sets the time until the TV automatically goes to Standby mode[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p. 19)Auto StandbySets the time the TV automatically goes to Standby mode when no operation isperformed for the selected times [Off] / [2] / [4] (hours)• Starting Timer Programming automatically does not affect this function.• Automatic input switching with the connected equipment affects this function andtime-count will be reset.• The notification message will appear 3 minutes before going to Standby mode.SetupEco NavigationAutomatically sets the TV to the most suitable energy-saving mode• If you press the OK button, the following items are set as below :[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save], [Power Save] [On][Intelligent Auto Standby] [On (No reminder)][Auto Standby] [2 hours]Recording Setup Formats the connected USB HDD and sets the condition (p. 53)Link SettingsVIERA Link Sets to use VIERA Link functions [Off] / [On] (p. 83)HDMI Content TypeAdjusts the picture settings according to the content type signal from the connectedequipment via HDMI cable [Off] / [Auto]• This function is available if the connected equipment supports HDMI Content Type.• The content type information will be displayed for several seconds when this functionworks.AV1 outChooses the signal to be transmitted from the TV to Q-Link [TV] / [AV2] / [Monitor][Monitor] : Image displayed on screen• Component, PC and HDMI signals cannot be output.