Panasonic Viera TX-L32E5E Operating Instructions Manual

Also see for TX-L32E5E: Operating instructions

Contents

English136 4. After the access point setting is finished, perform the connection testCheck wireless network connection.Check acquired IP address.Check for devices using same IP address.Check gateway connection.Check server connection.Connection Test5. Go to the next step(Press twice): succeededThe test is successful and the TV is connected tothe network.: failedCheck the settings and connections. And then select[Retry].● To set manually, select [Manual] and set eachitem.[WPS(Push button)]1. Press the WPS button on the access point until the light flashes2. Connect the TV with the access point1) Please press the ‘WPS’ button on the wirelessaccess point until its light flashes.2) When the light is flashing select ‘Connect’ onTV.If you are unsure, please check the instructionmanual of the wireless access point.WPS(Push button)Connect● Ensure that your access point supports WPS for this setup.● WPS: Wi-Fi Protected Setup™● If the connection has failed, check the settings and positions ofyour access point. And then, follow the on-screen instructions.3. After the access point setting is finished, perform the connection testCheck wireless network connection.Check acquired IP address.Check for devices using same IP address.Check gateway connection.Check server connection.Connection Test4. Go to the next step(Press twice): succeededThe test is successful and the TV is connected to thenetwork.: failedCheck the settings and connections. And then select[Retry].● To set manually, select [Manual] and set each item.7 Select [Home]Select [Home] viewing environment to use in your home environment.Please select your viewing environment.Home Shop selectset■ [Shop] viewing environment (for shop display only)[Shop] viewing environment is the demonstration mode to explain main features of this TV.Select [Home] viewing environment to use in your home environment.● You can return to viewing environment selection screen at the stage of Shop confirmation screen.1 Return to viewing environmentselection screen2 Select [Home]Please select your viewing environment.Home Shop selectsetShopYou have selected shop modeTo change viewing environment later on, you will need to initialise all settings by accessing ShippingCondition.Auto Setup is now complete and your TV is ready for viewing.If tuning has failed, check the connection of the RF cable, and then, follow the on-screen instructions.Note● To retune all channels [Auto Setup] in the Setup Menu● To add the available TV mode later [Add TV Signal] in the Setup Menu● To initialise all settings [Shipping Condition] in the Setup Menu