Accessories / Options●Quick Start Guide7Attaching the pedestalWarningDo not disassemble or modify the pedestal.Otherwise the TV may fall over and become damaged, and personal injury may result.●CautionDo not use any other TV and displays.Otherwise the TV may fall over and become damaged, and personal injury may result.●Do not use the pedestal if it becomes warped or physically damaged.If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest● Panasonic dealer immediately.During set-up, make sure that all screws are securely tightened.If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be● strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.Ensure that the TV does not fall over.If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal● injury may result.Two or more people are required to install and remove the TV.If two or more people are not present, the TV may be dropped, and personal injury may result.●Securing the TV■Use the assembly screws to fasten securely.Make sure that the screws are securely tightened.● Carry out the work on a horizontal and level surface.●Arrow markFoam mat orthick soft clothRotating part of the pedestalStays parallel with the TV when rotatedHoles for pedestal installationAdjust the panel to your desired angleEnsure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range.● Do not place any objects or hands within the full rotation range.●15°ab15°(View from the top)TX-L32G10B● a: 359 mm / b: 230 mmTX-L37G10B● a: 399 mm / b: 295 mmSet the mark at the centre as illustrated, toensure full degree rotation in either direction.NoteVisible part of the pedestal will remain parallel to the TV even when rotated.●