Panasonic Viera TX-L32U2B Operating Instructions Manual

Also see for TX-L32X20B: Service manual

Panasonic Viera TX-L32U2B Operating Instructions Manual Manual pdf 40 page image

40Timer ProgrammingNoteCheck that the LED is orange. If not, timer programmes are not active or not stored. Timer Programming reminder messages will remain displayed until one of the following occurs: You press the OK button to view the programme or the EXIT button to cancel the reminder.•The timer programming event that the reminder is set for ends.•“!” identifies that any timer programming events have overlapped. “Ext Rec.” is given priority over “Reminder”. When two or more “Ext Rec.” overlap, the first timer programming event starts and finishes as programmed. Thenext timer programming event will then start.2 mins. before the starting time, a reminder message appears if you are watching TV.To remove the message and start the programme• To cancel the Timer Programming• EXITExt Rec. of Timer Programming will automatically change to the programmed channel 10 seconds before the start time.To stop recording of the timer programming event, it may be necessary to stop the recorder manually. Ext Rec. of Timer Programming will be performed even if the TV is in Pause Live TV recording (p. 57). In this case, the Pause Live TV recording will be cancelled.EXITMENUINPUTTVjklghi mnotuvpqrs wxyzabc defTimer Programming from MenuThe Timer Programming menu allows you to choose programmes that you wish to remind watching orrecord to the external recorder. At the correct time, the TV will tune to the correct channel automaticallyto record even if the TV is in Standby mode.TV Guide may also be used to set timer programming event (p. 19) .Timer Programming can store up to 15 events. For recording using Timer Programming, the TV must be either On or in standby. For reminders to be displayed, the TV must be On.No other channel can be selected while Ext Rec. of a Timer Programming is in progress. It may not be possible to record an encrypted programme (which is copy-protected). When recording programmes, be sure to make the proper settings on the recorder connected to the TV. If a compatible recorder with Q-Link or similar technologies is connected to the TV (p. 54) and the “Link Settings”(p. 29) are correct, no setting of the recorder is required. Also read the manual of the recorder.If the recorder is not compatible with Q-Link or similar technologies, set “Q-Link” in the Setup Menu (p. 29) to the connected terminal (AV1 or AV2), and set the timer of the recorder in addition to the Timer Programming on theTV. For preparations of a recorder, read the manual of the recorder.Recordings are always in standard definition composite video via SCART, even if the original programme is in high definition.1 Select the tuner you want to use (DVB or Analogue)TV2 Display the menuMENU3 Select “Setup”Main MenuPictureSoundSetupaccessselect4 Select “Timer Programming”Setup MenuOff Timer OffAccessLink SettingsChild LockDVB Tuning MenuDisplay SettingsSystem MenuOther SettingsTimer Programmingaccessselect5 SetTo return to TV EXITTo unlock the tuner (stop recording)EXIT