Panasonic Viera TX-L32UX3E Operating Instructions Manual

Contents

Panasonic Viera TX-L32UX3E Operating Instructions Manual Manual pdf 17 page image

Watching TV17AspectChange the aspect ratio (image size)ASPECT Enjoy viewing the image at its optimum size and aspect.Programmes usually contain an “Aspect Control Signal” (Widescreen signal, etc.), and the TV will choose the aspectratio automatically according to the “Aspect Control Signal” (p. 68). If you would like to change the aspect ratio manually1 Display Aspect Selection list 2 While the list is displayed,select the modeASPECT Aspect SelectionAuto16:914:9Just4:34:3 FullZoom1Zoom2Zoom3SelectEXITRETURNChangeAspect Selection liststoreselect tYou can also change the mode onlyusing the ASPECT button.ASPECT (Press repeatedly until you reachthe desired mode)[Auto]The best ratio is chosen and the image expanded to fill the screen.For details (p. 68)[16:9] [4:3 Full]Directly displays the image at 16:9without distortion (anamorphic).Displays a 4:3 image enlargedhorizontally to fit the screen.tHD signal only[14:9] [Zoom1]Displays the image at the standard 14:9without distortion.Displays a 16:9 letterbox or 4:3 imagewithout distortion.[Just] [Zoom2]Displays a 4:3 image full-screen.Stretching is only noticeable at the leftand right edges.Displays a 16:9 letterbox (anamorphic)image full-screen without distortion.[4:3] [Zoom3]Displays the image at the standard 4:3without distortion.Displays a 2.35:1 letterbox (anamorphic)image full-screen without distortion.At 16:9, displays the image at itsmaximum (with slight enlargement).NotetAspect is fixed to [16:9] when [Viewing Mode] is set to [Game] in the Picture Menu.tNot available in teletext service.tAspect mode can be memorized separately for SD (Standard definition) and HD (High definition) signals.Last viewSwitch to previously viewed channel or input mode easilyLAST VIEWtPress again to return to the present view.NotetSwitching channel is not available while the recording of Timer Programming or Direct TV Recording is in progress.tWatching less than 10 seconds is not regarded as the previously viewed channel or input mode.