Panasonic Viera TX-L37G15B Operating Instructions Manual

Also see for VIERA TX-L37G15B: Brochure & specs

Contents

Panasonic Viera TX-L37G15B Operating Instructions Manual Manual pdf 66 page image

66Q-LinkPreparations■ Connect the DVD Recorder / VCR with the following logos:●“Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC”, “Easy Link”, “Megalogic” or “SMARTLINK”Q-Link connection● p. 64Use fully wired SCART cable.●Set up the DVD Recorder / VCR. Read the manual of the recorder.●Q-Link terminal setup in the Setup Menu● “Q-Link” (p. 32), “AV1 / AV2 out” (p. 32)Download Analogue channel setting● “Analogue channel download” (see below)Features available■Analogue channel downloadAnalogue channel setting can be downloaded to the recorder with analogue tuner. Digital channelsetting is not downloaded.To download Analogue channel setting● “Q-Link Download” (p. 32) or “Auto Setup” in Analogue mode (p. 35)or “Auto Setup” - when first using the TV (p. 12)Direct TV Recording - What you see is What you recordRecording the current programme in DVD Recorder / VCR immediately.EXITDIRECT TV RECGUIDEDIRECT TV RECAvailable conditions:● Picture source Mode Recording fromAnalogue TV TV monitor outAV Recorder’s tunerDVB TV TV monitor outAV( watching recorder’s tuner) AV Recorder’s tunerAV( watching recorder’s external input) AV Recorder’sexternal inputAV( watching TV’s external input) AV TV monitor outWhen Direct TV Recording is performed, the recorder is automatically● turned on if it is in Standby mode.Changing channel or turning off the TV is available while the recorder is● recording from its own tuner.Changing channel is not available while the recorder is recording from● the TV tuner.To stop recording■ Unlock the tunerGUIDEUnlockContinueTuner LockedPlease stop recording to operateEXITPower on link and Easy playbackWhen DVD Recorder / VCR starts playback or direct navigator / function menu for the equipmentare activated, the TV is turned on and input mode is switched automatically so that you can view thecontent. (Only when the TV is in Standby mode.)Power off linkWhen TV is set to Standby mode, the recorder is also automatically set to Standby. (Only when thevideocassette or disc is not active.)This function will work even if the TV enters standby mode automatically by Off Timer function or auto power● standby function.“DATA LOGIC” (a trademark of Metz Corporation)•“Easy Link” (a trademark of Philips Corporation)•“Megalogic” (a trademark of Grundig Corporation)•“SMARTLINK” (a trademark of Sony Corporation)•NoteSome recorders are not applicable. Read the manual of the recorder.●Link Functions (Q-LinkVIERA Link)