Panasonic Viera TX-L42ET50E Operating Instructions Manual

Also see for TX-L42ET50E: Operating instructions

Contents

How to Use Menu Functions40Menu Item Adjustments / Configurations (alternatives)SoundModeSelects your favourite sound mode [Music] / [Speech] / [User]● The selected mode affects all input signals.[Music]:Improves sound quality for watching music videos, etc.[Speech]:Improves sound quality for watching news, drama, etc.● In Music and Speech modes, you can adjust [Bass] and [Treble] settings, andthose settings will be stored for each mode.[User]:Adjusts the sounds manually by using the equaliser to suit your favourite soundquality.● For the User mode, [Equaliser] will appear on the Sound Menu instead of [Bass]and [Treble]. Select [Equaliser] and adjust the frequency.[Equaliser] (see below)Bass Adjusts level to enhance or minimise lower, deeper sound outputTreble Adjusts level to enhance or minimise sharper, higher sound outputEqualiserAdjusts the frequency level to suit your favourite sound quality● This function is available when [Mode] is set to [User].● Select the frequency and change the frequency level by using the cursor button.● To enhance the bass sound, raise the level of the lower frequency. To enhancethe treble sound, raise the level of the higher frequency.● To reset the levels of each frequency to the default settings, select [Reset toDefaults] by using the cursor button, and then press the OK button.Balance Adjusts volume level of right and left speakersHeadphone Volume Adjusts the volume of the headphonesSurroundSurround sound settings [Off] / [V-Audio] / [V-Audio Surround][V-Audio]:Provides a dynamic enhancer of width to simulate improved spatial effects.[V-Audio Surround]:Provides a dynamic enhancer of width and depth to simulate improved spatialeffects.● Switching is also possible by the SURROUND button on the remote control(p. 10).Auto Gain Control Automatically regulates large sound level differences between channels andinputs [Off] / [On]Volume Correction Adjusts the volume of individual channel or input modeSpeaker Distance toWallCompensates for the low frequency sound due to the distance between thespeakers and the wall [Over 30cm] / [Up to 30cm]● If the back space between the TV and wall is over 30 cm, [Over 30cm] isrecommended.● If the back space between the TV and wall is within 30 cm, [Up to 30cm] isrecommended.MPXSelects multiplex sound mode (if available)[Stereo]: Use this normally.[Mono]: When stereo signal cannot be received.[M1] / [M2]: Available while mono signal is transmitted.● For Analogue mode