USB HDD / SD Card Recording73 To start One Touch RecordingStartNo other channel can be selected while therecording is in progress. When both USB HDD and SD Card are availableSelect the recording deviceUSB HDD1Please select recording deviceEXITSelectRETURNOKSD Cardselectset To stop recording on the wayor To play back or delete the recorded contents “Recorded TV mode” (p. 81)Even if One Touch Recording is in progress, you can play back all the contents. (Depending on the USB HDD / SDCard, it may not be available or the recording may not work properly while playback.)Record constantly [REW LIVE TV](USB HDD only)Records the current programme constantly.Confirm the code of the remote control is “73” (p. 31).Select [Auto] to start [REW LIVE TV]Recording SetupREW LIVE TV Autoselectaccess / storeWhen you select [Auto], the recording willstart automatically.This recording will not start if the otherrecording is in progress, TV signal conditionis bad or any images are not displayed. To operate [REW LIVE TV]To pause To search backward (up to 90 minutes)After pausing or searching backward, the following buttons are available to operate.Search backwardPlayback / PauseReturn to the current programmeSearch forwardSearch backward /forwardPause /Playback Playback Return to thecurrent programme To stop [REW LIVE TV]REW LIVE TVRecording SetupOffAutoselect [Off] If you stop [REW LIVE TV], the recordedcontent for [REW LIVE TV] will be deleted.[REW LIVE TV] will be stopped and the recorded content deleted automatically in the following conditions:(Even if [REW LIVE TV] stops for the following conditions, as long as the setting is [Auto], the new recording will startautomatically in a condition that makes the recording available.) Selected other channels Selected locked channel Selected invalid channel No TV signal When the other recording starts When the TV is turned to Standby or off