Panasonic Viera TX-P37C10B Operating Instructions Manual

Link Functions●(Q-Link / VIERA Link) Advanced57Features available■ (Using VIERA Link Menu)NoteThese functions may not work properly depending on the connected equipment.●Image or sound may not be available for the first few seconds when Input mode is switched.●Easy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre or Amplifier.●Read the manual of the equipment.“HDAVI Control 4” is the newest standard (current as of December, 2008) for HDAVI Control compatible●equipment. This standard is compatible with conventional HDAVI equipment.To confirm this TV’s version of HDAVI Control● “System Information” (p. 33)Speaker control Speaker SelectionYou can control the theatre speaker with this TV remote control (point the remote control at the TV’ssignal receiver).If you cannot operate, check the settings and the equipment● “Summary of Q-Link and VIERA Link features” (p. 50 and p. 51), “Preparations” (p. 53)Access and control the speaker volumeEXITDIRECT TV RECASPECTOPTION RETURNTEXTPROGRAMMESTTL INDEX HOLDMENU NINPUTTV AVTV1 Display “VIERA Link Menu”2 Select “Speaker Selection”Direct TV RecSpeaker SelectionVIERA Link MenuHome CinemaStartVIERA Link Control RecorderPause Live TVSpeaker Selection Home Cinemaselect3 Set to “Home Cinema” or “TV”setHome Cinema■Player theatre, Blu-ray Disc theatre or Amplifier will beautomatically turned on if it is in Standby mode and the sound isfrom theatre speakers connected to the equipment.Volume up / down●(Volume slide bar will be displayed whenadjusting the volume of the equipment. )Mute●The sound of TV speakers is mute.●When the equipment is turned off, TV speakers will be active.●TV■TV speakers are active.NoteTo enjoy the sound from the DIGA Recorder in multi-channel sound,●connect an HDMI cable from the DIGA Recorder to the Amplifier (p. 51).