Panasonic Viera TX-P42ST50B Operating Instructions Manual

Contents

Using Network Services (DLNA / VIERA Connect)78■ [Acquire IP Address] / [Acquire DNS Address]Sets [IP Address], [Subnet Mask], [Default Gateway] and [DNS Address].Select [Acquire IP Address] / [Acquire DNS Address] and set to [Auto] (recommended).Acquire IP Address AutoIP AddressSubnet MaskDefault GatewayAcquire DNS AddressDNS AddressProxy SettingsIP/DNS SettingsAuto● The available settings are displayed automatically.Manual settings([IP Address], [Subnet Mask], [Default Gateway], [DNS Address])selectaccess / store3 Select [Proxy Settings] and set the itemsAcquire IP AddressIP AddressSubnet MaskDefault GatewayAcquire DNS AddressDNS AddressProxy SettingsIP/DNS SettingsAutoAutoAccessselectaccess● After settings, return to the previous menu.■ [Proxy]Sets Proxy address.● This is the address of the relay server that is connected to the target server instead of the browser and sends data tothe browser. Setting is required if specified by the provider.1. Select [Proxy] 2. Enter the addressProxyHostselectset● You can set characters by using numericbuttons.3. Store0ProxyProxy PortProxy Settingsselectaccess■ [Proxy Port]Sets Proxy port number.● This number is also specified by the provider with the Proxy address.1. Select [Proxy Port]0ProxyProxy PortProxy Settings2. Move the cursor and enter the number4 Select [Connection Test] and access to testConnection Test Accessselectaccess● Performs automatic testing of the network connection for the TV. (It takes awhile to test.)Check network cable connection.Check acquired IP address.Check for devices using same IP address.Check gateway connection.Check server connection for VIERA Connect.Connection Test : succeededThe test is successful and the TV is connected to the network.: failedCheck the settings and connections. And then try again.Wireless connection settingsThis setting is for the wireless network connection.● Confirm the encryption key, settings and positions of your access point before starting setup. For details, read themanual of the access point.1 Select [Network Connection] and set to [Wireless]Network Connection Wirelessselectaccess / store