Panasonic Viera TX-P42UT30J Operating Instructions Manual

Also see for TX-P42UT30Y: Service manual

Contents

Using Network Services764 Select [Connection Test] and access to testab-cd-ef-gh-ij-klConnection TestNetwork TypeAccess Point SettingsIP/DNS SettingsNetwork Link SettingsSoftware UpdateMAC AddressNetwork SetupWiredAccessaccessselect• Performs automatic testing of the network connection for the TV. (It takes a whileto test.)Check network cable connection.Check acquired IP address.Check for devices using same IP address.Check gateway connection.Check server connection.Connection Test : succeededThe test is successful and the TV is connected to the network.: failedCheck the settings and connections, and then perform this function again.Wireless connection settingsThis setting is for the network connection by using the Wireless LAN Adaptor. (Wireless connection)• Confirm the encryption key, settings and positions of your access point before starting setup. For details, read the manual ofthe access point.1 Select [Network Type] and set to [Wireless]ab-cd-ef-gh-ij-klConnection TestNetwork TypeAccess Point SettingsIP/DNS SettingsNetwork Link SettingsSoftware UpdateMAC AddressNetwork SetupWireless access / storeselect2 Select [Access Point Settings]ab-cd-ef-gh-ij-klConnection TestNetwork TypeAccess Point SettingsIP/DNS SettingsNetwork Link SettingsSoftware UpdateMAC AddressNetwork SetupWirelessAccess accessselect• When the access point is already set, [Current Settings] screen will be displayed. Tochange the settings, select [No] on this screen and go to the next step.3 Select the connection type and setConnection TypePlease select network connection type.WPS(Push button)WPS(PIN)Search for access pointManualaccessselect• For details of each connection type (p. 77, 78)• After settings, return to [Network Setup] screen4 Select [Connection Test] and access to testab-cd-ef-gh-ij-klConnection Test AccessNetwork TypeAccess Point SettingsIP/DNS SettingsNetwork Link SettingsSoftware UpdateMAC AddressNetwork SetupWireless accessselectPerforms automatic testing of the network connection for the TV. (It takes a whileto test.)Check access point connection.Check acquired IP address.Check for devices using same IP address.Check gateway connection.Check server connection.Connection Test : succeededThe test is successful and the TV is connected to the network.: failedCheck the settings and connections, and then perform this function again.If you continue to have difficulty, please contact your internet service provider.