Panasonic Viera TX-P42V20E Operating Instructions Manual

Contents

Displaying PC Screen on TV● Multi Window● AdvancedINPUTAVTV53Displaying PC Screen on TV1 Select the external inputAV2 Select “PC”Input SelectionAV1AV2/SAV3COMPONENTPCHDMI1HDMI2HDMI3HDMI4TVMedia ServeraccessselectCorresponding signals● p. 92If “H-freq.” or “V-freq.” is shown in red,●the signals may not be supported.The screen of the PC connected to the TV can be displayed on the TV.You can also listen to PC sound with the audio cable connected.To connect PC● p. 86To return to TV■ TVPC menu setting■ To make settings● “How to Use Menu Functions” to (p. 27)Menu Item Adjustments / Configurations (options)PictureAdvanced SettingsR-Gain Adjusts the white balance of bright red areaG-Gain Adjusts the white balance of bright green areaB-Gain Adjusts the white balance of bright blue areaR-Cutoff Adjusts the white balance of dark red areaG-Cutoff Adjusts the white balance of dark green areaB-Cutoff Adjusts the white balance of dark blue areaGamma Switches the gamma curve (S Curve / 1.8 / 2.0 / 2.2 / 2.4 / 2.6)Reset to Defaults Press the OK button to reset to the default Advanced SettingsSetupPC SetupInput ResolutionSwitches to a wide viewVGA (640 × 480 pixels), WVGA (852 × 480 pixels),●XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)Options change depending on signals●Clock Set to the minimum level if noise occursH-posAdjusts horizontal positionV-posAdjusts vertical positionClock Phase Eliminates flicker and distortionAdjust after Clock adjustment● Set to the minimum level if noise occurs●SyncChooses another synchronous signal if the image is distorted (H & V / On Green)H & V : by the horizontal and vertical signals from your PC●On Green : by the green signal from your PC (if available)Reset to Defaults Press the OK button to reset to the default PC Setup settingsOther items● p. 28 - 33NoteFor HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using●HDMI cable (p. 91).