Panasonic Viera TX-P42VT20E Operating Instructions Manual

Also see for TXP42VT20E: Operating instructions Service manual

Contents

How to Use Menu Functions●23Menu Item Adjustments / Configurations (alternatives)SoundModeSelects the basic sound mode (Music / Speech / User)The selected mode affects all input signals.●Music: Improves sound quality for watching music videos, etc.Speech: Improves sound quality for watching news, drama, etc.Music and Speech modes use CONEQ™ brand equalization technology to improve●sound quality. CONEQ equalizes acoustic power frequency response and correctstime and phase alignment errors of a speaker system. Speakers with CONEQ performas near-perfect electro-acoustic transducers providing true to the original sound withthe highest musically and intelligibility.In Music and Speech modes, you can adjust “Bass” and “Treble” settings, and those●settings will be stored for each mode.User: Adjusts the sounds manually by using the equalizer to suit your favourite sound quality.For the User mode, “Equalizer” will appear on the Sound Menu instead of “Bass” and●“Treble”. Select the “Equalizer” and adjust the frequency. “Equalizer” (below)Bass Increases or decreases level to enhance or minimise lower, deeper sound outputTreble Increases or decreases level to enhance or minimise sharper, higher sound outputEqualizerAdjusts the frequency level to suit your favourite sound qualityThis function is available when “Mode” is set to “User”.●Select the frequency and change the frequency level by using the cursor button.●If you want to enhance the bass sound, raise the level of the lower frequency. If you●want to enhance the treble sound, raise the level of the higher frequency.To reset the levels of each frequency to the default settings, select the “Reset to●Defaults” by using cursor button, and then press the OK button.Balance Adjusts volume level of right and left speakersHeadphone Volume Adjusts the volume of the headphonesSurroundSurround sound settings (Off / V-Audio / V-Audio Surround / V-Audio ProSurround)V-Audio: Provides a dynamic enhancer of width to simulate improved spatial effectsV-Audio Surround: Provides a dynamic enhancer of width and depth to simulateimproved spatial effectsV-Audio ProSurround: Provides a more progressive enhancer and reverberation tosimulate improved spatial effectsVolume Correction Adjusts the volume of individual channel or input modeSpeaker Distance toWallAdjusts the low frequency sound (Over 30cm / Up to 30cm)If the back space between the TV and wall is over 30 cm, “Over 30cm” is recommended.●If the back space between the TV and wall is within 30 cm, “Up to 30cm” is recommended.●MPXSelects multiplex sound mode (if available)Normally: Stereo●Stereo signal cannot be received: Mono●M1 / M2: Available while mono signal is transmitted●Analogue mode only●Audio PreferenceSelects the initial setting for audio tracks (Auto / MPEG)Auto : Automatically selects the audio tracks if programme has more than two tracks.The priority is given in the following order - Dolby Digital Plus, HE-AAC,Dolby Digital, MPEG.MPEG : The priority is given to MPEG as long as the programme contains MPEG audio.Dolby Digital Plus and Dolby Digital are the methods of coding digital signals developed by●Dolby Laboratories. Apart from stereo (2ch) audio, these signals can be multi-channel audio.HE-AAC is a perceptual coding method used to compress digital audio for efficient●storage and transmission.MPEG is an audio compression method that compresses audio to the smaller size●without any considerable loss of audio quality.Dolby Digital Plus and HE-AAC are the technologies for HD (High definition) programmes.●DVB mode only●A different menu will be displayed when “Advance(isfccc)” in the Setup Menu is set to “On” or in the mode of PC●input, Media Player or Network service operations.Only available items can be selected.●