Panasonic Viera TX-P42X60B Operating Instructions Manual

21Update from InternetThe ETHERNET terminal is for TV’s software update.You can download a newer version of software throughthe internet, if it is available.Network connectionsConnect the TV and the broadband network equipment(modem, hub or router) by using a LAN cable.Ferrite core - Large size (supplied)*Less than 10 cmInternet environmentLAN cable (Unshielded)● Use the Unshielded TwistPair (UTP) LAN cable.Installing the Ferrite corePull back the tabs(in two places)Wind the cabletwiceCloseNote● If you do not have any broadband network services,please consult your retailer for assistance.● Ensure to use a LAN straight cable for this connection.● Set up and connect any equipment required for thenetwork environment. You cannot make settings forthe equipment on this TV. Read the manual of theequipment.● Contact your Internet Service Provider (ISP) ortelecommunications company for further assistanceregarding the network equipment.Network Setup[Network] [Network Connection]Follow the on-screen instructions.Update TV’s software[Network] [Software Update]Accesses the specific web site to update TV’s softwareand search if any software updates are available.Follow the on-screen instructions.Using Media PlayerMedia Player allows you to enjoy photo, video or musicrecorded on a USB Flash Memory.Photo mode: Digital photo data will be displayed.Video mode: Digital video data will be played back.Music mode: Digital music data will be played back.● Supported file format “Supported file format inMedia Player” (p. 27)● During the operation, audio signal is output from AV1,DIGITAL AUDIO and HDMI2 (ARC function) terminals.But no video signals are output. To use HDMI2 withARC function, connect an amplifier that has ARCfunction and set to use theatre speakers (p. 24, 26).● [Date] shows the date on which the recording wasmade by the recording equipment. The file withoutrecord of the date is shown “**/**/****”.● The picture may not appear correctly on this TVdepending on the recording equipment used.● Display may take some time when there are many filesand folders.● Partly degraded files might be displayed at a reducedresolution.● Picture setting may not work depending on theconditions.● The folder and file names may be different dependingon the digital camera or digital video camera used.■ To insert or remove the USB Flash Memory● Insert or remove straightly and completely.● Connect the USB Flash Memory to the USB port.● Check the type of terminals and devices are correctwhen connecting.42-inch model● When using USB cable, use the supplied Ferrite core(Middle size) to comply with the EMC standard.As for installing the Ferrite core, refer to the installingof the Ferrite core for headphones. (p. 7)1 Insert the USB Flash Memory to the TV2 Display [VIERA TOOLS] and select the content(Photo / Video / Music)VIERA LINK VIDEO MUSIC ECO NAVIGATIONPhoto● Select the appropriate device and content for playingback each file.■ To change the deviceWhile the thumbnail is displayed, display the deviceselection(yellow)■ To change the contentsWhile the thumbnail is displayed, display the contentsselection(blue)