Panasonic Viera VT50A series Operating Instructions Manual

Contents

How to Use Menu Functions46Menu Item Adjustments / Configurations (alternatives)TimerTimer Programming Sets a timer to record or remind forthcoming programmes (p. 53)● For Digital TVOff Timer Sets the duration of time until the TV automatically goes into Standby mode[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p. 23)Auto StandbySets the duration of time that the TV will remain on when no operation isperformed [Off] / [2] / [4] (hours)● Starting Timer Programming automatically does not affect this function.● Automatic input switching with the connected equipment affects this functionand time-count will be reset.● The notification message will appear 3 minutes before going into Standby mode.Auto Standby/Sets the duration of time that the TV will remain on when no operation isperformed [Off] / [2] / [4] (hours)● Automatic input switching with the connected equipment affects this functionand time-count will be reset.● The notification message will appear 3 minutes before going into Standby mode.SetupEco NavigationAutomatically sets the TV to the most suitable energy-saving mode● If you press the OK button, the following items are set as below:[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save],[Power Save] [On][Intelligent Auto Standby] [On (No reminder)][Auto Standby] [2 hours]Recording Setup Settings for the recording feature of the USB HDD / SD Card (p. 62 - 64)Bluetooth Setup Settings for the specific devices supporting Bluetooth wireless technology (p. 104)VIERA Touch PadControllerPairing Registers the VIERA Touch Pad Controller (supplied) to this TV● Only 1 touch pad controller can be registered.Cursor Settings Sets for the cursor of the touch pad controllerChild Lock Applies access control for channels or inputs to prevent unwanted access (p. 56)Tuning Menu∗Favourites Edit Creates a list of favourite channels (p. 49)● For Digital TVChannel List Skips the unwanted channels or edits channels (p. 50)Auto Tuning Automatically searches for the receivable channels (p. 51)Manual Tuning Searches for the channels manually (p. 51)Update ChannelListUpdates the channel list while keeping your settings (p. 52)● For Digital TVNew ChannelMessageSelects whether to give a notification message when a new channel is found[Off] / [On] (p. 52)● For Digital TVSignal Condition Checks the signal condition (p. 52)● For Digital TVAdd TV SignalAdds the TV mode● This function is available if you skip any modes to tune in [Auto Tuning] for firstusing the TV.● To operate, refer to the “Auto Tuning” operations for first using the TV (p. 17).