Panasonic Viera VT50H series Operating Instructions Manual

Tuning and Editing Channels48Set all channels automatically [Auto Tuning]Automatically retune all channels received in the area.1 Start Auto Tuning 2 Settings are made automaticallyExample: Digital TV Example: Digital TVDigital TV Auto TuningAll digital TV tuning data will be erasedCH C1 69TV Fin landBoxer NavigatorSVT HD999323232SearchingDigital TV Auto TuningScanThis will take about 7 minutes.CH Channel Name Type QualityDigital TV: 4Digital TVDigital TVDigital TV● All the previous tuning settings are erased.● When the operation is completed, the channel at the lowest position will be displayed.● Search begins in the order from the lower channels to the higher channels.● If tuning has not been done completely [Manual Tuning] (see below)Set Digital TV channel manually [Manual Tuning]Normally use [Auto Tuning] or [Update Channel List] to retune Digital TV channels.If tuning has not been done completely or for adjusting the direction of the aerial or dish, use this function.● All channels found will be added to the Channel List.474.00[CH21] MHz001010Digital TV Manual TuningFrequencySignal QualitySignal StrengthNo. Channel Name Type NewDigital TV: 0select frequencyselect offsetstart scanSet Analogue TV channel manually [Manual Tuning]CH 5705.5MHz1 120Analogue TV Manual TuningManual TuningStoreFine TuningSound SystemColour System AutoFine Tuning● Use to make small adjustments to the tuning of an individual channel(affected by weather conditions, etc.)Manual TuningSet Analogue TV channel manually after Auto Tuning.● Set Sound System and Colour System, and then perform this function. SetColour System [Auto] normally.● If a VCR is connected only with the RF cable, select channel position [0].1 Select the channel position 2 Select the channel3 Search 4 Select [Store]selectstore