Basic ConnectionsEDALINELAN DC INBC FAAC Adaptor CordBLAN CableC2-conductor Telephone CordDTo AC OutletETo Switching HubFTelephone Jack or PBX (RJ11C)Note• If using an AC adaptor, use only the included ACadaptor (PQLV206).• To use PoE (Power over Ethernet), connect theLAN cable to a PoE-compatible (IEEE802.3af)switching hub. The included AC adaptor doesnot need to be connected when using PoE.Connecting a Portable Station (PS)Connect the included PS Cable to the [AUDIO IN/OUT] jack of the unit (A), and to the headset jack of thePS.AConnecting a ComputerConnect the included PC Cable to the [AUDIO IN/OUT] jack of the unit (A), and to the microphone jack(red plug; B) and headphone jack (green plug; C) ofthe computer.A CBConnecting an External Wired MICAn optional KX-NT701 External Wired MIC can beconnected to the unit using the EXT MIC1 (A) or EXTMIC2 (B) jacks. 2 mics can be connected.ABSetting the Date & Time1. Press [MENU].2. Select "Basic Settings", then pressSELECT .3. Select "Date & Time", then pressSELECT .4. Using the keypad, enter 2 digits each for the year,month, day of the month, hour (24-hour format), andminute.5. PressSAVE .6. Press [MENU].Line SelectionThe unit can make calls using the IP line, TEL line, PSline, and PC line.The IP line is always available when the unit isconnected to an IP network. Whether the TEL line, PSline, or PC line is available is determined by the "LineSelection" setting. For example, when it is set to "IP+ PS", the IP and PS lines are available.1. Press [MENU].2. PressLINE .3. Select the desired setting.• "IP + TEL": The IP and TEL lines are available.• "IP + PS": The IP and PS lines are available.4 Quick Reference Guide Document Version 2008/10Quick Reference Guide