Panasonic WJ-GXD400 Setup Instructions

Also see for WJ-GXD400: Product catalog Brochure Product catalog Specifications Installation guide

Panasonic WJ-GXD400 Setup Instructions Manual pdf 30 page image

30Group sequenceLive images from the camera/encoder/recorder on all the screens are simultaneously switched and displayed in the3-screen/6-screen modes. The camera preset position cannot be selected during the group sequence.Important:• The audio output is not provided during the sequence display.• When a sequence is performed with two or more devices, the JPEG and MPEG-4 formats shall not be usedsimultaneously with one camera.1 Click the [Camera] button on the setup menu.2 Click the [Group sequence] tab.The "Group sequence number" window will be dis-played.3 Click the [Setup >>] button.The "Step registration" window will be displayed.4 Perform the settings for each item.Refer to the following for further information aboutthe registrations for each item.5 Click the [Set] button.The specified values are stored.Setup items Screen patternSelect a screen pattern.6-screen/3-screen (primary screen on the left)/3-screen(primary screen on the right) StepDisplays the step number of the sequence. Up to 64steps can be contained. Group numberDisplays the registered camera group number. Dwell timeSelect an interval time to go to the next sequential stepfrom the following.3s/5s/10s/15s/20sNote:• Group registration should be completed via[Camera] and [Group setup] before group numberselection.