Panasonic WJ-GXE500E Installation Manual

Also see for WJ-GXE500: Product catalog Integration note Product catalog Operating instructions Installation guide

Contents

Panasonic WJ-GXE500E Installation Manual Manual pdf 25 page image

25Configure the network settingsInstall the softwareBefore installing the software, refer to the readme file on the provided CD-ROM first.Software included on the provided CD-ROM• Panasonic IP setting softwareConfigure the network settings of the unit. Refer to the following for further information.• Viewer Software "Network Camera View 4"It is necessary to install the viewer software "Network Camera View 4" to display images on aPC. Install the viewer software by double-clicking the "nwcv4setup.exe" icon on the providedCD-ROM.Configure the network settings of the unit using the PanasonicIP setting softwareIt is possible to perform the network settings of the unit using the IP setup software on the providedCD-ROM.When using two or more units, it is necessary to configure the network settings of each unit inde-pendently.If the Panasonic IP setting software does not work, perform the network settings of the unit and thePC individually on the "Network" page of the setup menu. Refer to the Operating Instructions (PDF)for further information.Important:• When using Microsoft Windows 7 or Microsoft Windows Vista, the "Windows Security Alert"window may be displayed when starting the IP setup software. In this case, disable "UserAccount Control" from the control panel.• For the security enhancement, the MAC address/IP address of the unit to be configured will notbe displayed when around 20 minutes have passed after turning on the power of the unit.(when the effective period is set to "20 minutes" in the IP setup)• Panasonic IP setting software is inoperable in other subnets via the same router.• This unit cannot be displayed or set with an older version of the IP setup software (version2.xx).