Panasonic WJ-HD309 Operating Instructions Manual

Also see for WJHD309 - DIGITAL DISK RECORDER: Manual Operating instructions Operating instructions Operating instructions Operating instructions

Contents

Panasonic WJ-HD309 Operating Instructions Manual Manual pdf 97 page image

97Perform the settings for event actions of each event type(motion detection, video loss, command alarm and terminalalarm).q [Event Setup] Settings for the alarm outputduration and the buzzer durationPerform the settings for the alarm output duration andthe buzzer sound duration for each event type (motiondetection, video loss, command alarm and terminalalarm).The following are available for the alarm output dura-tion.When OFF is selected, the alarm output will not be sup-plied.(s: second, m: minute)OFF: No alarm output is supplied.1 s - 30 s (in 1 second intervals)/40 s/50 s/1 m/2 m/3 m/4 m/5 mEXT: Alarm output will continue until the ALARM RESETbutton is pressed.Important:The alarm output duration cannot be set for video loss.Signals will be supplied continuously from the cameraerror output terminal (pin no. 17) of the ALARM/CON-TROL connector on the rear panel during the periodwhen the video signal is lost. (Refer to page 80.)The following are available for the buzzer sound dura-tion.When OFF is selected, a buzzer will not sound.(s: second, m: minute)OFF: The buzzer will not sound.1 s - 30 s (in 1 second intervals)/40 s/50 s/1 m/2 m/3 m/4 m/5 mEXT: The buzzer will continue until the ALARM RESETbutton is pressed.w [VMD Setup] Perform the settings for themotion detection functionSelect ON or OFF to determine whether to enable ordisable the motion detection function for each camerachannel.When ON is selected, perform the settings for the automotion detection area for each camera channel. Up to 4areas can be set for a camera channel for the detectionarea. Refer to page 45 for further information about theauto motion detection function.[Screenshot 1]Start operation from the camera channel selection menu ofthe "VMD Setup" window. [Event] Function for EventsEvent ScheduleSystemDisplay CommSwitcherSETUP MENU LIVEMaintenance RecordingEvent SetupVMD SetupAlarm SetupTerminal SetupSETUPSETUPSETUP VMD Video Loss Setup Terminal Command AlarmEvent ScheduleSystemDisplay CommSwitcherSETUP MENU LIVEMaintenance RecordingEvent SetupVMD SetupAlarm SetupTerminal SetupSETUPSETUPSETUP VMD Video Loss Setup Terminal Command AlarmEvent ScheduleSystemDisplay CommSwitcherSETUP MENU LIVEMaintenance RecordingEvent SetupVMD SetupAlarm SetupTerminal SetupSETUPSETUPSETUP VMD Video Loss Setup Terminal/Command Alarm Setup Alarm Output BuzzerO K CANCEL1 0 s1 0 sEvent ScheduleSystemDisplay CommSwitcherSETUP MENU LIVEMaintenance RecordingEvent SetupVMD SetupAlarm SetupTerminal SetupONOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFF CAM1 CAM2 CAM3 CAM4 CAM5 CAM6 CAM7 CAM8 CAM9 CAM10 CAM11 CAM12 CAM13 CAM14 CAM15 CAM16Event ScheduleSystemDisplay CommSwitcherSETUP MENU LIVEMaintenance RecordingEvent SetupVMD SetupAlarm SetupTerminal SetupONOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFF CAM1 CAM2 CAM3 CAM4 CAM5 CAM6 CAM7 CAM8 CAM9 CAM10 CAM11 CAM12 CAM13 CAM14 CAM15 CAM16