Panasonic WJ-HD500A Operating Instructions Manual

Also see for WJHD500A - Digital Disk Recorder: Operating instructions Operating instructions

Contents

Panasonic WJ-HD500A Operating Instructions Manual Manual pdf 35 page image

36r Warning DisplayDisplays the status in case of Disk Recorder trouble.THERMAL ✽: Indicates thermal error in the DiskRecorder or the extension units.(✽ indicates the extension unit number)HDD ✽✽%: Is displayed when the remaining space ofthe Hard Disk reaches a specified value.(✽✽ indicates the remaining capacity.)DISK FULL: Is displayed when the remaining space ofthe Hard Disk reaches 0 %.DVD ✽✽%: Indicates the remaining space of the DVD-RAM Disk. (✽✽ indicates the remaining capacity.)ALTERED: Is displayed when the recorded data arealtered.ERROR ✽-✽: Indicates access error of the Hard Disk.(✽-✽ indicates the Hard Disk number in the DiskInformation menu)ERROR: Indicates that the other errors have occurred.PWR LOSS: Is displayed when the UPS(Uninterrupted Power Supply) detects a powerfailure.WARNING ✽-✽: Indicates that the hard disk willbecome failure soon. Replace ones for systemcomplement.PROTECTED: Indicates that the DVD-RAM disk isnot write enabled.NO DISK: Indicates that the DVD-RAM disk is notinserted in the DVD Extension Unit.FORMAT ERROR orMEDIUM ERROR: Indicates that the DVD-RAM diskis not identified.DVD BUSY: Indicates that the DVD Extension Unitis not ready or is being accessed.t System Status DisplayDisplays the system status of the Disk Recorder.5: Indicates that data are being played back.5 X✽: Indicates that data are being played back withthe search function.(✽ indicates the search speed value)y : Indicates that the playback is being paused.COPYING: Indicates that data are being copied.LOCKED: Indicates that the buttons are locked.BUSY: Indicates that the line is busy.y Group DisplayDisplays the selected group (G1, G2, G3, G4).When all groups are selected, the display is disabled.u Electronic Zoom DisplayDisplays to indicate that the zooming mode is selected.ZOOM X✽: Indicates that the electronic zoom mode isselected (✽ indicates a value)i Group Title DisplayDisplays the group title edited in the setup menu.o Camera Title DisplayDisplays the camera title edited in the setup menu.It can also enable the alarm display set in the setupmenu when an alarm is activated.ALARM: Receives an alarm from the ALARM port.VMD: Detects a motion on the imageCH✽✽LOSS: Detects a video signal loss has occurred.!0 REMOTEIndicates that the access from network is under way.