118Step 1Display the [CAM] tab. (☞ Page 114)Step 2Click the [OPEN] button in the [Menu] box.→ The setup window will be displayed and the setupmenu of the camera will be displayed in the imagedisplay area.Step 3Operate the setup menu of the camera.Operate the setup menu of the cameraTo control the camera connected to the recorder, it is necessary in advance to configure the settings of thecamera function. The settings of the camera function can be configured on the setup menu of the camera.It is possible to call the setup menu of the camera from a PC. The contents of the setup menu and the opera-tion procedures vary depending on the model of the camera. Refer to the operating instructions of the camerafor further information.The following are descriptions of how to display the setup menu of the camera and of how to perform the basicoperation.To operate the setup menu of the camera, use the fol-lowing buttons.Move the cursor Arrows button (CDA B)Change parameters Arrows button (A B)Apply the set value ormove to the lower levelmenu[SET] buttonMove to the higher levelmenu[SETUP/ESC] buttonDisplay the specialmenuClick the [Reset] buttonafter moving the cursoronto [SPECIAL] of thesetup menu of the camera.Reset the camera Click the [All reset] buttonafter moving the cursoronto [CAMERA RESET] ofthe setup menu of the cam-era.Step 4To close the setup menu of the camera, click the[CLOSE] button.Note:• When the camera has the refresh function(REFRESH), it is possible to execute the refreshfunction by clicking the [Reset] button.• The camera setup window may sometimes remaindisplayed after the setup menu of the camera isclosed such as when resetting the camera, etc. Inthis case, click the [Close] button of the camerasetup window.• Only users whose user level is allowed to controlcameras or to configure the settings can configurethe settings of the camera.
