4PrefaceBy using this software, the following settings of the digital disk recorder WJ-ND300 (A) can be configured on a PCvia a network.• Network settings• Registration of cameras, and deletion/edit of the registered camerasIP addresses of the cameras connected to the WJ-ND300 (A) can be automatically assigned with this software.When using multiple network disk recorders, it is necessary to configure the above settings independently.This software works only when the software version of the WJ-ND300 (A) is 3.00 or later.When failed to configure the above settings with this software, configure them using the setup menu of the WJ-ND300 (A). To configure the settings of the connected cameras, use the setup software of the cameras.Refer to the setup instructions (PDF) of the WJ-ND300 (A) or the operating instructions of the camera for furtherinformation.When the recorder in use is the WJ-ND200, it is possible to configure the network settings of the WJ-ND200 via anetwork using this software.System ConfigurationWhen operating the WJ-ND300 (A)To configure the settings with this software, connect the PC in which this software is installed to the client PC port ofthe WJ-ND300 (A) and the camera to the camera port of the WJ-ND300 (A). When the camera is connected to theclient PC port, it is impossible to detect and configure the camera.PC in which this software is installedClient PC portCameraCameraALARMALARMSUSPENDOPERATEERROR TIMER REC 1-LINK/ACT-2HDD1 HDD2 HDD3 HDD4ESC SETPULLNetwork Disk RecorderWJ-NDWJ-ND300 (A)NetworkNetworkCamera portPUSH TO LOCK/EJECTPUSH TO LOCK/EJECTDetection andconfiguration areunavailablePrecautionDistributing, copying, disassembling, reverse compiling, reverse engineering, and also exporting in violation of exportlaws of the software provided with this product, is expressively prohibited.