Panasonic WJ-ND300 Network Setup Manual

Also see for WJ-ND300 Administrator Console: Product catalog Manual Operating instructions Operating instructions Brochure & specs

Contents

Panasonic WJ-ND300 Network Setup Manual Manual pdf 21 page image

21• The IP addresses of the camera registered in the recorder and in thecamera are not the same.Configure as follows.q Delete a camera icon .w Click the [Set] button after selecting the camera icon to turnthe icon to the edited icon .e Select the recorder icon and click the [Manual Registration] button.• Display the network settings of the camera and click the [Set] buttonwithout changing the settings.The newly detected icon will turn to the edited icon ( ) and the set-tings will be registered in the recorder.Tips to configure the settingsWhen having a problem to configure the settings with this software, check and try the solution described below.Need to register the networksettings of the newly detect-ed camera without chang-ing.The cameras with the sameMAC address are displayedwith the andicons.IP address is not displayedwhen registered after select-ing "ON" for the DHCP func-tion of the camera.No live image is displayedeven though the cameraicon is displayed.ReferencepagesTipProblem• It may take time for the camera to obtain the IP address. Wait for awhile and display IP address by executing search.Registration of the camera (registration of IP address, etc.) in therecorder is necessary after displaying the IP address.• When the camera is already registered, the model number of the cam-era or the HTTP port number may be incorrect. When the user authen-tication of the camera is "ON", it is necessary to register the username/password on the "Camera" page of the recorder. Check and editthe settings.

/ 24

Related manuals for Panasonic WJ-ND300 Administrator Console