25[A-B Repeat] boxThe A-B repeat playback will be performed.[Start Time]:Starts repeated playback of images between the A-Brepeat start/end points.Date and time of the A-B start/end points will be dis-played in the playback position operations area.[Cancel]:The A-B repeat playback will be canceled.[Registration] boxDownloads the image currently playing to a PC.[Download]:Displays the download setting window for download-ing images.Date and time of the download start/end points willbe displayed in the playback position operationsarea.[VIewer]:Clicking this button will start downloading the viewersoftware that can play downloaded images.[Text] buttonThe attached text information will be displayed whenthis button is clicked during pausing.[Recording] boxThe recording button and the recording stop button willbe displayed when the button is clicked.Displaying the recording button and the recording stopbutton will be unavailable when the button is clicked.[Recording] button: Starts manual recording.[Stop recording] button: Stops manual record-ing.Important:• To display the [Recording] button and the [Stoprecording] button, hold down the button until theyare displayed.[Zoom] boxZooming can be adjusted by clicking the[Wide] button or the [Tele] button.[Focus] boxFocusing can be adjusted by clicking the [Near]button or the [Far] button.The auto focus function can be performed by clickingthe [Auto] button.[Auto] boxThe auto function of the camera will start by clicking the[ON] button. The auto function can be stoppedby clicking the [OFF] button.Control pad/buttonsClicking the buttons around the control pad can move(pan/tilt) a camera in the clicked direction. Clickinginside the control pad also can adjust the vertical/hori-zontal position (pan/tilt) of the displayed image.Panning/tilting speed will be faster if a clicked point getsfarther from the center point of the control pad.[Iris] boxThe iris can be adjusted by clicking the [Close]button or the [Open] button. It is possible toreset the set iris by clicking the [Reset] button.[PRESET] boxMoves a camera to the preset position registered inadvance. Click the [SET] button after selecting apreset number by clicking the button.Registering preset positions is required to perform thepreset function. (Refer to the operating instructions ofthe camera in use for descriptions of how to register thepreset positions.)[CAM] Tab Control pad/buttons