Panasonic WJ-ND300A/G Setup Instructions

Also see for WJ-ND300A: Brochure Reference Manual Operating instructions Operating instructions

Contents

Panasonic WJ-ND300A/G Setup Instructions Manual pdf 64 page image

64Settings for Communication with other Devices [Comm]Perform the network settings such as settings of the IP address of this unit and gateway address.The following are the descriptions of how to perform the required settings for communicating with PCs.Basic network settings [Basic Setup]Basic network settings can be performed with this menu.Screenshot 1Click the [Comm] button in the setup menu (Advanced)and then click "Basic Setup". The "Basic Setup" windowwill be displayed.Step 1Perform the settings for each item.Refer to the following for further information about thesettings for each item.Step 2Click the [SET] button after completing the settings.Setup items NW Link down detectionSelect "ON" or "OFF" to enable or disable the networkline disconnection detection for the CAMERA/client PCport on the rear of the unit.ON: Detects if the disconnection of the network lineconnected to the CAMERA/client PC port occurs.OFF: Does not detect the network line disconnection. NW Bandwidth ControlSelect a rate for transmission to the FTP server from thefollowing.Unlimited/32 kbps/64 kbps/128 kbps/256 kbps/512 kbps/1 024 kbps/2 Mbps/5 Mbps/10 MbpsImportant:The bandwidth will not be controlled when liveimages are transmitted in MPEG-4 format. Port ForwardingPerform the settings relating to the port forwarding.When the [SETUP] button is clicked the following win-dow will be displayed. Perform the settings on this win-dow. Click the [SET] button after completing the set-tings, and close the window by clicking the [×] button atthe top right of the window.