Panasonic WJ-ND300A Setup Instructions

Also see for WJ-ND300A: Brochure Reference Manual Operating instructions Operating instructions

Contents

Panasonic WJ-ND300A Setup Instructions Manual pdf 8 page image

8Performing the Network SettingsScreenshot 1Start operation when the standby display is displayedon the LCD. Step 1Display the IP address setup display by pressing thearrows button (C or D).With the following network environment, it is not necessary to perform the network settings. It is possible to performthe settings or operate this unit using a web browser after completing the connection.IP Address: 192.168.1.2 - 192.168.1.249, 192.168.1.251 - 192.168.1.254Subnet mask: 255.255.255.0Gateway Address: 192.168.1.1When the network settings are different from the settings above, perform the network settings of this unit and thePC.It is necessary to display the camera setup menu to perform the network settings of cameras. It is possible to displaythe camera setup menu on the "NW Camera Setup" menu of the setup menu ("Camera" – "NW Camera Setup").Performing the Network Settings of this UnitPerform the following settings relating to network.Operate the buttons on the front panel of the unit to perform the network settings of the unit. The settings items willbe displayed on the LCD.• DHCP• IP Address• Subnet mask• Gateway• HTTP portThe default network settings of each port are as follows.DHCPIP addressSubnet maskGatewayHTTP portOFF192.168.0.250255.255.255.0192.168.1.1–OFF192.168.1.250255.255.255.080–192.168.2.250255.255.255.0––Camera port Client PC port Maintenance portImportant:Network settings for each port (IP address, etc.) should be on a different subnet. Otherwise, network communica-tion may be failed.