Panasonic WJ-ND400 Installation Manual

Also see for WJND400 - NETWORK DISK RECORDER: Brochure Reference Product catalog Operating instructions Manual

Contents

Major Operating Controls and Their Functions12HDD status indicator (left side)Shows the operating status of the HDDs.(7) Key holeUse to open and close the front cover.Keep the key in a safe place.(8) Maintenance portUse for service when connected directly to a PC. Normally, itis not used.Note:• Use a straight cable to connect a PC directly to themaintenance port.(9) Recording indicator [REC](10) Timer indicator [TIMER](11) Operate indicator [OPERATE](12) Arrow buttons (up, down, left, or right)Use to move the cursor on the LCD and for direct input ofvalues.(13) Set button [SET]Use to set items on the LCD.(14) Escape button [ESC]Use to return to the previous screen when doing operationson the LCD.(15) Link indicators [LINK/ACT]Camera Link indicator [LINK/ACT1]Lights or blinks when linked with camera.PC Link indicator [LINK/ACT2]Lights or blinks when connected to a PC (PC and camerawhen one port used).Reserved Link indicator [LINK/ACT3]This indicator is for future extension (off).(16) Front coverOpen to add, or replace HDD units and to configure HDDoperations (Single/RAID5/RAID6).Keep it closed and locked during normal operations.Important:• When the HDD indicators light red in the RAID5/RAID6 mode,quickly replace the HDD where the errors occurred. Contactyour dealer for information on replacing HDDs.⋅ RAID5 mode:Data cannot be recovered when two or more HDDindicators are lighting or blinking red.⋅ RAID6 mode:Data cannot be recovered when three or more HDDindicators are lighting or blinking red.Lights green : HDD power [On](HDD formatted)Blinks green : HDD for playback only(only for playback, recording notpossible)Blinks orange : Formatting HDDLights red : HDD format failedOff : HDD power [Off]HDD is not connected or notrecognizedLock : Turn key to leftOpen : Turn key to rightLights : RecordingOff : Recording finished.Lights : When a schedule is setBlinks : Schedule recording in-progressLights : Power [On]Off : Power [Off]Lights green : When a camera port connection isestablishedBlinks green : Receiving dataLights green : When a client PC port connection isestablishedBlinks green : Receiving dataND400_Basic.book 12 ページ２００８年４月８日火曜日午後３時５９分