Panasonic WJ-NT304 Operating Instructions Manual

Also see for i-pro WJ-NT304: Product catalog Integration note Specification sheet Brochure Network operating instructions

Contents

Panasonic WJ-NT304 Operating Instructions Manual Manual pdf 19 page image

19Specifications Network Interface UnitPower source: 12 V DC, 1.0 A (using the supplied AC adapter)Power consumption: Approx. 12 WAmbient temperature: –10 °C to +50 °C {14 °F to 122 °F}*1Ambient humidity: Less than 90 %Video input connectors: NTSC model: 1 V [P-P]/75 Ω (BNC x 4), NTSC composite video signalPAL model: 1 V [P-P]/75 Ω (BNC x 4), PAL composite video signalVideo output connectors: NTSC model: 1 V [P-P]/75 Ω (BNC x 4), active loop-thru output NTSC composite video signalPAL model: 1 V [P-P]/75 Ω (BNC x 4), active loop-thru output PAL composite video signalAudio input connector: –10 dBV, 10 kΩ, unbalanced x 1 (RCA pin jack)Audio output connector: –10 dBV, 600 kΩ, unbalanced x 1 (RCA pin jack)Serial port: 9-pin D-sub connector x 1 (For remote setup)RS-485, x1 (RJ-11) (For external device control)Parallel port: Input x 4*2, output x 4*3, AUX output x 1*3, Time adjust input x 1*2Resolution: 640 (H) x 480 (V) / 320 (H) x 240 (V) selectableImage compression method: JPEG/MPEG-4Audio compression method: G.726Protocol: HTTP1.1, RTP, TCP/IP, UDP/IP, FTP (server and client), SMTP, DHCP, DNS, DDNS, NTP, SNMPCamera control: Pan and tilt/zoom and focus/preset positions/auto focus(When using Panasonic combination dome cameras)Network: 10BASE-T/100BASE-TX, RJ-45 connectorSecurity: PasswordOS: Microsoft® Windows ® 2000 Professional SP4, Windows® XP Home Edition SP2, Windows® XPProfessional SP2Browser: Microsoft® Internet Explorer® 6.0 SP2Microsoft® Internet Explorer® 6.0 SP1 only when using Windows® 2000 Professional SP4Compatible SD memory card is as follows. (Optional)Manufactured by Panasonic (Performance with this unit has been checked.)Capacity:64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB (SDHC memory card is not supported.)Dimensions: 210 (W) x 44 (H) x 307 (D) mm {8.27" (W) x 1.73” (H) x 12.09” (D)}(excluding rubber feet and projections)Weight: Approx. 2.0 kg {4.4 lbs.} AC AdapterPower Source: 100 V AC to 240 V AC, 50 Hz/60 HzOutput voltage: 12 V DCOutput current capacity: 4.58 ADimensions: 120 mm (W) x 60 mm (H) x 35 mm (D) {4.72" (W) x 2.36" (H) x 1.38" (D)} (excluding the DC cable)Weight: 0.35 kg {0.77 lbs.}* 1 When using this product without turning the power off*2 Non-voltage make contact input, 50 kΩ +5 V DC pull-up*3 Open Collector output, +24 V, 100 mA maximumStandard AccessoriesCD-ROM* .................................................................... 1 pc.Operating Instructions (this book) .............................. 1 pc.Warranty card (NTSC model only) ............................. 1 pc.* The CD-ROM contains the operating instructions (PDFsand the software).The following are for installation.AC adapter* ................................................................ 1 pc.Code label .................................................................. 1 pc.Power cord*NTSC model ............................................................... 1 pc.PAL model .................................................................. 2 pcs.* Use the power cord that is suited to your locality.

/ 20

Related manuals for Panasonic i-pro WJ-NT304