25Live images can be recorded on the recorder. Images from up to 16 cameras can be simultaneously recordedwith this recorder.Record images (schedule recording)Recording can be automatically started and stopped according to a previously specified schedule. Refer to theInstallation Guide for schedule recording.Note:• When event recording is triggered by an alarm during the schedule recording, event recording has the higherpriority. Refer to the "Recording mode and its priority" section below for further information about the priori-ty of the recording mode.• To stop schedule recording, stop the recording on the setup menu. Refer to the Installation Guide for furtherinformation.• In case of a network error, the image of the camera where the communication error has occurred will not berecorded. Recording starts when the network error is recovered. If the status in which the communicationwith the camera is disconnected recovers within around 40 seconds, images will not be recorded and errorlogs will not be saved.• Schedule-recorded image data will be divided into multiple files every hour on the hour. In that moment,recording may sometimes be interrupted around for 1 second.Recording mode and its priorityThere are 3 recording modes. The recording modes and their priority levels are as follows.When two or more recordings with different recording modes started simultaneously, only recording with thehigher priority will start.Recording mode PriorityEvent recording 1Schedule recording 2Pre-event recording 3Record imagesNetwork camerasHDDImage dataRecorder
