4Before StartingPrecautionsThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant topart 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference when the equipment is operated in a commercial environment. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used in accordance with theOperating Guide, may cause harmful interference to radio communications.Operation of this equipment in a residential area is likely to cause harmful interference in which case theuser will be required to correct the interference at his/her own expense.Any unauthorized changes or modifications to this equipment would void the users authority to operate thisdevice.Warning: To assure continued compliance, use only a shielded interface cable when connecting themachine’s parallel interface port to the host computer. Also, any changes or modifications notexpressly approved by the party responsible for compliance could void the user’s authority tooperate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may causeundesired operation.• You need to read the software license agreement before setting up the Printer Driver.• You need to read the following precautions which are described in the Machine’s Operating Instructions.1. Installation2. Ventilation3. Handling4. Toner and Paper5. For Your SafetyFor Users in the USA