Panasonic WV-AS65 Operating Instructions Manual

Contents

Panasonic WV-AS65 Operating Instructions Manual Manual pdf 17 page image

17Connecting with the RecorderConnect the recorder with PC and perform the network settings. Refer to the operating instructions of the recorder inuse.Performing the network settingsWith the following network environment, it is not necessary to perform network settings.Step 1On the task bar, click "Start" and then click the "ControlPanel".The control panel will be displayed.Important:Log in to the PC as an administrator.Step 2Click the "Network and Internet Connections" icon.The "Network and Internet Connections" window willbe displayed.When connecting the PC with an WJ-ND300IP Address: 192.168.1.2 - 192.168.1.249,192.168.1.251 - 192.168.1.254Subnet mask: 255.255.255.0Gateway Address: 192.168.1.1When connecting the PC with an WJ-HD300 or WJ-ND200IP Address: 192.168.0.2 - 192.168.0.249,192.168.0.251 - 192.168.0.254Subnet mask: 255.255.255.0Gateway Address: 192.168.0.1When the network settings are different from the settings above or when the WJ-ND300, WJ-HD300 and WJ-ND200are in the same system, perform the network settings of the recorder and the PC.Performing the network settings of the recorderPerform the settings on the "SETUP MENU" of the recorder to conform to the network environment of the PC.Refer to the Operating Instructions of the recorder for further information.Performing the network settings of a PCIt is necessary to set the IP address of the PC to access the recorder as follows.• To access the WJ-ND300: 192.168.1.xxx (a number from 2 to 254 except 1 and 250)• To access the WJ-HD300 or the WJ-ND200: 192.168.0.xxx (a number from 2 to 254 except 1 and 250)Start the following operations just after the PC is started up. The following procedures are to change the settings tothe default for the WJ-HD300 series.