Panasonic WV-BF102 Operating Instructions Manual

Also see for WVBF102 - CCTV CAMERA: Operating instructions

Contents

Panasonic WV-BF102 Operating Instructions Manual Manual pdf 5 page image

-3-5. Never face the camera towards the sun.Do not aim the camera at bright objects. Whetherthe camera is in use or not, never aim it at the sunor other extremely bright objects. Otherwise,blooming or smear may be caused.6. Do not use chemical e.g. thinner or benzene forcleaning the lens.When the lens becomes dirty, wipe it using a softcloth or a cloth soaked with alcohol. Using chemi-cal e.g. thinner or benzene for cleaning the lensmay damage the surface of the lens.7. Do not operate the camera beyond the specifiedtemperature, humidity or power source ratings.Use the camera under conditions where tempera-ture is between −10°C - +50°C (14°F - 122°F), andhumidity is below 90%. The input power source is12V DC.Caution:To prevent fire or electric shock hazard, a ULlisted wire (VW-1, style 1007) should be used for12V DC Input Terminals.PRECAUTIONS1. Do not attempt to disassemble the camera.To prevent electric shock, do not remove screwsor covers.There are no user serviceable parts inside. Ask aqualified service person for servicing.2. Handle the camera with care.Do not abuse the camera. Avoid striking, shaking,etc. The camera could be damaged by improperhandling or storage.3. Do not expose the camera to rain or moisture,or try to operate it in wet areas.This model is produced for indoor use. If the cam-era is exposed to rain or moisture, turn the poweroff immediately and ask a qualified service personfor servicing. Moisture can damage the cameraand also create the danger of electric shock.4. Do not use strong or abrasive detergents whencleaning the camera body.Use a dry cloth to clean the camera when dirty.In case the dirt is hard to remove, use a milddetergent and wipe gently.