Panasonic WV-BM1790 Operating Instructions Manual

Contents

Panasonic WV-BM1790 Operating Instructions Manual Manual pdf 4 page image

4The Panasonic Video Monitor WV-BM1790 reproducessharp black and white images on a 16-inch diagonalscreen, designed primarily for industrial applications, andaccepts standard CCIR/EIA input signals.PREFACE• Refer all work related to the installation of this prod-uct to qualified service personnel or systeminstallers.• Do not block the ventilation opening or slots on thecover.To prevent the appliance from overheating, place it atleast 5 cm (2 inches) away from the wall.• Do not drop metallic parts through slots.This could permanently damage the appliance. Turnthe power off immediately and contact qualified servicepersonnel for service.• Do not attempt to disassemble the equipment.To prevent electric shock, do not remove screws orcovers.There are no user-serviceable parts inside. Contactqualified service personnel for maintenance.• Handle the appliance with care.Do not strike or shake it, as this may damage theequipment .• Do not expose the equipment to water or moisture,nor try to operate it in wet areas.Take immediate action if the equipment becomes wet.Turn the power off and refer servicing to qualified ser-vice personnel. Moisture may damage the equipmentand also cause electric shock.• Do not use strong or abrasive detergents whencleaning the equipment body.Use a dry cloth to clean the equipment when it is dirty.When the dirt is hard to remove, use a mild detergentand wipe gently. Afterwards, wipe off the remained partof the detergent in it with a dry cloth.• Do not operate the equipment beyond its specifiedtemperature, humidity or power source ratings.Use the equipment at temperatures within –10˚C -+50˚C (14˚F - 122˚F) and a humidity below 90 %.The input power source for this equipment is 120 V AC60 Hz.PRECAUTIONSFEATURES• 413 mm (16-1/4 inches) diagonal viewing size.• Horizontal resolution of 1 000 lines at the center.• Looped through BNC connectors for video input andoutput.• Accepts multi-standard (CCIR or EIA) input• Can be mounted into the optional rack with the WQ-LM170E rack mounting bracket.