Panasonic WV-BP330 Operating Instructions Manual

Also see for WVBP330 - B/W CCTV CAMERA: Operating instructions

Contents

-10-C. The maximum extensible coaxial cablelength between the camera and the monitor isshown below.Video Cable1. It is recommended to use a monitor whose resolu-tion is at least equal to that of the camera.2. Set the termination switch to the 75Ω position onthe last monitor.A. Use a 75Ω coaxial cable.B. Set the termination switch to the 75Ω posi-tion on the last monitor and to the Hi-Z posi-tion on the other monitors. Do not change thepositions after setting.OUTIN 75¶Hi-ZVIDEO OUTIN 75¶Hi-ZVIDEOMonitor Monitor24 V AC, 50 Hz(19.5 V - 28 V)1 2C. WV-BP334 (24V AC 50Hz)Connect the power cable to the AC 24V IN termi-nal on the rear panel of the WV-BP334.Copper wire #24 #22 #20 #18size (AWG) (0.22mm2) (0.33mm 2) (0.52mm 2) (0.83mm 2)Length (m) 95 150 255 425of Cable(Approx.) (ft) 314 495 842 1 403Recommended wire gauge sizes for 24V AC line