Panasonic WV-BP554 Operating Instructions Manual

Also see for WVBP554 - CCTV B/W CAMERA: Operating instructions Operating instructions Specifications

Contents

-30-9. Special Menu (SPECIAL)This menu lets you adjust and set up the video signalof the camera to meet your requirements.Move the cursor to END on the bottom line of the CAMSET UP menu and press or simultaneously for2 seconds or longer. The SPECIAL menu appears onthe monitor as shown below.9-1. Camera Picture Upside Down Positioning(UP SIDE DOWN)1. Move the cursor to the UP SIDE DOWN parameter.2. Select ON when you want to turn the pictureupside down.** CAM SET UP **CAMERA ID OFFALC/ELC ALCSHUTTER ---AGC ONSENS UP OFFSYNC INTMOTION DET OFFLENS DRIVE DCEND SET UP ENABLE↵↵↵** SPECIAL **UP SIDE DOWN OFFAP GAIN ....I....PEDESTAL .I.......- +CAMERA RESET PUSH SWRET END9-2. Aperture Gain Setting (AP GAIN)1. Move the cursor to the AP GAIN parameter.2. While observing the vector scope or video monitor,move the “I” cursor to adjust the aperture gainlevel.9-3. Pedestal Level Setting (PEDESTAL)1. Move the cursor to the PEDESTAL parameter.2. While observing the wave form monitor/oscillo-scope or video monitor, move the “I” cursor toadjust the pedestal level (black level).To reset to the factory settings1. Move the cursor to the CAMERA RESET parame-ter. The words PUSH SW start blinking.2. While holding down and , press for 2seconds or longer. The camera is reset to the fac-tory settings.To close the SPECIAL menu and return to the CAMSET UP menuMove the cursor to RET and press .To close the SPECIAL menu and return to thecamera pictureMove the cursor to END and press .