Panasonic WV-CF224 Operating Instructions Manual
Also see for WV-CF224: Service manual
■ Installation Plans & PreparationsThe camera can be installed on a junction boxor directly on the wall/ceiling.1. Locally procure four camera-mountingscrews suitable for the installation surfaceand structure of the wall/ceiling or junctionbox. There are four 4.5 mm (3/16”) diame-ter screw holes and a guide hole on thecamera panel.2. Preparations• When planning to use a junction box, pro-cure one locally that meets the dimensionsin the figure.• When directly mounting on the wall/ceiling,prepare a space which is ø135 mm or larg-er.3. Cable route• When using a junction box, cables will gobehind the junction box via the cableaccess hole on the camera panel.• When directly mounting on the wall/ceiling,you need to cut out the panel cover tomake a sideway exit for cables.Color CCTV CameraOperating InstructionsModel No.WV-CF224Before attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.N0503-1103 3TR001728BAA Printed in JapanPREFACEThe WV-CF224 is a 1/4-inch CCD color cameradesigned for use in video surveillance systems.The exclamation point within anequilateral triangle is intended toalert the user to the presence ofimportant operating and mainte-nance (servicing) instructions in theliterature accompanying the appli-ance.The lightning flash with arrowheadsymbol, within an equilateral trian-gle, is interned to alert the user tothe presence of uninsulated "dan-gerous voltage" within the product'senclosure that may be of sufficientmagnitude to constitute a risk ofelectric shock to persons.The serial number of this product may be found onthe top of the unit.You should note the serial number of this unit in thespace provided and retain this instruction as a per-manent record of your purchase to aid identificationin the event of theft.Model No. WV-CF224Serial No.SA 1966SA 1965WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture.The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, suchas vases, shall be placed on the apparatus.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS INSIDE. REFER SER-VICING TO QUALIFIED SERVICE PERSONNEL.CAUTIONRISK OF ELECTRICSHOCK DO NOT OPENNOTE: This equipment has been tested and foundto comply with the limits for a Class A digitaldevice, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonableprotection against harmful interference when theequipment is operated in a commercial environ-ment. This equipment generates, uses, and canradiate radio frequency energy and, if not installedand used in accordance with the instruction manu-al, may cause harmful interference to radio com-munications.Operation of this equipment in a residential area islikely to cause harmful interference in which casethe user will be required to correct the interferenceat his own expense.FCC Caution: To assure continued compliance,(example - use only shielded interface cables whenconnecting to computer or peripheral devices). Anychanges or modifications not expressly approvedby the party responsible for compliance could voidthe user’s authority to operate this equipment.For U.S.AThe camera features a high picture qualitythanks to the use of digital signal processingLSIs, and easy mounting on the ceiling or wall.1. This product should be installed and con-nected by qualified service personnel orsystem installers in conformity with NEC.2. Use a class 2 power source supplying 12 VDC or 24 V AC.3. To prevent fire or electric shock hazard,use a UL listed cable (VW-1, style 1007) toconnect the power supply to the camera.4. Be sure to use a ceiling board/wall havingenough strength to support this camera.5. Do not attempt to disassemble thecamera.To prevent electric shock, do not removescrews or covers.There are no user-serviceable parts inside.Ask qualified service personnel for servic-ing.6. Handle the camera with care.Do not abuse the camera. Avoid striking,shaking, etc. The camera could be dam-aged by improper handling or storage.7. Do not use strong or abrasivedetergents.Use a dry cloth to clean the camera bodywhen dirty.In case the dirt is hard to remove, use amild detergent and wipe gently.Afterwards, wipe off the remaining deter-gent with a dry cloth.8. Clean the lens faceplate with care.Do not clean the lens with strong or abra-sive detergents. Use lens tissue or a cottontipped applicator and ethanol.9. Never face the camera towards the sun.Do not aim the camera at bright objects.Whether the camera is in use or not, neveraim it at the sun or other extremely brightobjects. Otherwise, blooming or smear maybe caused.10. Do not operate the camera beyond itsspecifications.Use the camera under conditions wheretemperature is between –10 °C to +50 °C(14 °F to 122 °F), and humidity is below90%. The input power source is 24 V AC or12 V DC.11. Use a monitor whose resolution is at leastequal to that of the camera.PRECAUTIONSMAJOR OPERATING CONTROLS AND THEIR FUNCTIONSq Camera Panelw Pan/Tilt/Azimuth TableAdjusts the panning/tilting and azimuthangle of the camera.e Focus LeverFixes the focus position after adjusting.r Zoom LeverFixes the zoom position after adjusting.t Video Jack (3.5-diam. mini jack)For connecting an LCD monitor to adjustthe camera images. Use an L-type plug tosave space.y Video Output ConnectorSupplies the video output signals. The sig-nals will be interrupted when the video jackis connected to an LCD monitor.u Power CableSupplies 24 V AC or 12 V DC from an exter-nal power source.1ON ADE03S2 3qwrety u!1!0io1ON ADE03S2 3i Aperture Level SelectorSHARP: Sharpens the image outline.SOFT: Softens the image outline.The default setting is SHARP.o Back Light Compensation SelectorON: Compensates the background if it isbrighter than the object.OFF: Does not compensate.The default setting is OFF.!0 Synchronization Mode SelectorSpecifies a source for synchronization.INT: Internal 2:1 interlace.LL: Line-lock mode driven by 24 V AC.The default setting is INT.Note: Do not set the switch to LL (Line-Lock) position when supplying 12 VDC to avoid synchronization error.!1 Panel CoverON OFFAP SHARP* SOFTBLC ON OFF*SYNC INT* LL1ON2 383.5 mm(3-5/16")ø135 mm(5-5/16")32.5 mm(1-1/4")46 mm(1-13/16")Front / Upperø18 mm (11/16")Cable access holeSideway cable exit4-ø4.5 mm(4-ø3/16")INSTALLATION■ Mounting the CameraDisassembly of the camera1. Remove the panel cover with a Phillipsscrewdriver.2. Turn the panel cover counter-clockwise.3. Remove the panel cover.4. Remove the inner dome. |
Related manuals for Panasonic WV-CF224
Panasonic WV-CF224EX Operating Instructions Manual
Panasonic WV-CF20 Operating Instructions Manual
Panasonic WV-CF20 Operating Instructions Manual
Panasonic WV-CF212 Operating Instructions Manual
Panasonic WV-CF324 Operating Instructions Manual
Panasonic WV-CF250 Operating Instructions Manual
Panasonic WV-CF212 Operating Instructions Manual
Panasonic WV-CF254 Operating Instructions Manual
Panasonic WV-CF254 Operating Instructions Manual
Panasonic WV-CF284 Operating Instructions Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine