Panasonic WV-CF224EX Operating Instructions Manual

Also see for WV-CF224EX: Specifications Specifications

Contents

Panasonic WV-CF224EX Operating Instructions Manual Manual pdf 1 page image

2. Preparations• When planning to use a junction box, pro-cure one locally that meets the dimensionsin the figure.• When directly mounting on the wall/ceiling,prepare a space which is ø135 mm {ø5-5/16"} or larger.3. Cable route• When using a junction box, cables will gobehind the junction box via the cableaccess hole on the camera panel.• When directly mounting on the wall/ceiling,you need to cut out the panel cover tomake a sideway exit for cables. Installation Plans & PreparationsThe camera can be installed on a junction boxor directly on the wall/ceiling.1. Locally procure four camera-mountingscrews suitable for the installation surfaceand structure of the wall/ceiling or junctionbox. There are four 4.5 mm {3/16"} diame-ter screw holes and a guide hole on thecamera panel.Color CCTV CameraOperating InstructionsModel No.WV-CF224EXBefore attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.The model numbers in these Operating Instructions are given without suffix.NM1205-0 3TR004366AAA Printed in JapanPREFACEThe WV-CF224EX is a 1/4-inch CCD color cam-era designed for use in video surveillance sys-tems. The camera features a high picture quali-ty thanks to the use of digital signal processingLSIs, and easy mounting on the ceiling or wall.1. This product should be installed and con-nected by qualified service personnel orsystem installers in conformity with NEC.2. Use a class 2 power source supplying 12 VDC or 24 V AC.3. To prevent fire or electric shock hazard,use a UL listed cable (VW-1, style 1007) toconnect the power supply to the camera.4. Be sure to use a ceiling board/wall havingenough strength to support this camera.5. Do not attempt to disassemble thecamera.To prevent electric shock, do not removescrews or covers.There are no user-serviceable parts inside.Ask qualified service personnel for servic-ing.6. Handle the camera with care.Do not abuse the camera. Avoid striking,shaking, etc. The camera could be dam-aged by improper handling or storage.7. Do not expose the camera to rain ormoisture, or try to operate it in wetareas.This product is designed for indoor use orlocations where it is protected from rainand moisture.Turn the power off immediately and ask aqualified service personnel for servicing.Moisture can damage the camera and alsocreate the danger of electric shock.8. Do not use strong or abrasivedetergents when cleaning the camerabody.Use a dry cloth to clean the camera bodywhen it is dirty.In case the dirt is hard to remove, use amild detergent and wipe gently.Afterwards, wipe off the remained part ofthe detergent in it with a dry cloth.9. Clean the lens faceplate with care.Do not clean the lens with strong or abra-sive detergents. Use lens tissue or a cottontipped applicator and ethanol.PRECAUTIONSMAJOR OPERATING CONTROLS AND THEIR FUNCTIONSq Camera Panelw Pan/Tilt/Azimuth TableAdjusts the panning/tilting and azimuthangle of the camera.e Focus LeverFixes the focus position after adjusting.r Zoom LeverFixes the zoom position after adjusting.t Video Jack (3.5-diam. mini jack)For connecting an LCD monitor to adjustthe camera images. Use an L-type plug tosave space.y Video Output ConnectorSupplies the video output signals. The sig-nals will be interrupted when the video jackis connected to an LCD monitor.u Power CableSupplies 24 V AC or 12 V DC from an exter-nal power source.1ON ADE03S2 3qwrey u!1!0io1ON ADE03S2 3ti Aperture Level Selector [AP]SHARP: Sharpens the image outline.SOFT: Softens the image outline.The default setting is SHARP.o Back Light Compensation Selector[BLC]ON: Compensates the background if it isbrighter than the object.OFF: Does not compensate.The default setting is OFF.!0 Synchronization Mode Selector [SYNC]Specifies a source for synchronization.INT: Internal 2:1 interlace.LL: Line-lock mode driven by 24 V AC.The default setting is INT.Note: Do not set the switch to LL (Line-Lock) position when supplying 12 VDC to avoid synchronization error.!1 Panel CoverON OFFAP SHARP SOFTBLC ON OFFSYNC INT LL1ON2 383.5 mm{3-5/16"}ø135 mm{5-5/16"}32.5 mm{1-1/4"}46 mm{1-13/16"}Front / Upperø18 mm {11/16"}Cable access holeSideway cable exit4-ø4.5 mm{4-ø3/16"}INSTALLATIONThe lightning flash with arrowheadsymbol, within an equilateral trian-gle, is intended to alert the user tothe presence of uninsulated "dan-gerous voltage" within the product'senclosure that may be of sufficientmagnitude to constitute a risk ofelectric shock to persons. The serial number of this product may be found onthe surface of the unit.You should note the serial number of this unit in thespace provided and retain this instruction as a per-manent record of your purchase to aid identificationin the event of theft.Model No.Serial No.SA 1966SA 1965NOTE: This equipment has been tested and foundto comply with the limits for a Class A digitaldevice, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonableprotection against harmful interference when theequipment is operated in a commercial environ-ment. This equipment generates, uses, and canradiate radio frequency energy and, if not installedand used in accordance with the instruction manu-al, may cause harmful interference to radio com-munications.Operation of this equipment in a residential area islikely to cause harmful interference in which casethe user will be required to correct the interferenceat his own expense.FCC Caution: To assure continued compliance,(example - use only shielded interface cables whenconnecting to computer or peripheral devices). Anychanges or modifications not expressly approvedby the party responsible for compliance could voidthe user’s authority to operate this equipment.For U.S.ACaution:Before attempting to operate this product, pleaseread the label on the surface of the unit.The exclamation point within anequilateral triangle is intended toalert the user to the presence ofimportant operating and mainte-nance (servicing) instructions in theliterature accompanying the appli-ance.This Class A digital apparatus complies withCanadian ICES-003.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICINGTO QUALIFIED SERVICE PERSONNEL.CAUTIONRISK OF ELECTRICSHOCK DO NOT OPENWARNING:• This apparatus must be earthed.• To prevent fire or electric shock hazard, do not expose this apparatus to rain or moisture.• The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases,should be placed on the apparatus.• All work related to the installation of this product should be made by qualified service personnel or system installers.10. Never face the camera towards the sun.Do not aim the camera at bright objects.Whether the camera is in use or not, neveraim it at the sun or other extremely brightobjects. Otherwise, blooming or smearmay be caused.11. Do not operate the camera beyond itsspecifications.Use the camera under conditions wheretemperature is between –10 °C to +50 °C{14 °F to 122 °F}, and humidity is below90 %. The input power source is 24 V ACor 12 V DC.12. Use a monitor whose resolution is at leastequal to that of the camera.

/ 2

Related manuals for Panasonic WV-CF224EX