Panasonic WV-CF504 Installation Manual

Also see for WV-CF504: Product catalog Specifications Operating instructions

Panasonic WV-CF504 Installation Manual Manual pdf 11 page image

11Precautions for installationThis product is designed to be usedindoors.This product is not operable outdoors.Do not expose the product to direct sunlight forhours and do not install the product near aheater or an air conditioner. Otherwise, it maycause deformation, discoloration and malfunc-tion. Keep the product away from water andmoisture.Installing placeContact your dealer for assistance if you areunsure of an appropriate place in your particu-lar environment.• Make sure that the installation area isstrong enough to hold the product, suchas a concrete ceiling.• Install the camera in the foundation area ofthe architecture or where sufficient strengthis assured.• If a ceiling board such as plaster board istoo weak to support the total weight, thearea shall be sufficiently reinforced.Avoid installing this product in the follow-ing locations.• Location where it may get wet from rain orwater splash.• Locations where a chemical agent is usedsuch as a swimming pool.• Locations subject to steam and oil smokesuch as a kitchen, Locations near flamma-ble gas or vapor.• Locations where radiation or x-ray emis-sions are produced.• Locations where corrosive gas is pro-duced, Locations where it may be dam-aged by briny air such as seashores.• Locations where the temperature is notwithin –10 °C to +50 °C {14 °F to +122 °F}.• Locations subject to vibrations (This prod-uct is not designed for on-vehicle use.)Avoid moist or dusty places to install thissystem.Otherwise, lifetime of the internal parts may beshortened.Avoid installing the camera in a place witha high level of noise.Installation near an air conditioner, an air clean-er, a vending machine, or the like causes noise.Be sure to remove this product if it is notin use.Keep the camera cable away from thelighting cable.Failure to observe this may cause noise.Radio interferenceWhen the camera is used near TV/radio anten-na, strong electric field or magnetic field (near amotor or a transformer), images may be dis-torted and noise sound may be produced.In such a case, run the camera cable throughspecialized steel conduit tubes.Locally procure the screwsScrews are not supplied with this product. Pre-pare the screws according to the material,structure, strength and other factors of theThe following points as well as the contents of "Warning" and " Caution" shall beobserved.Panasonic assumes no responsibility for injuries or property damage resulting from fail-ures arising out of improper installation or operation inconsistent with this documenta-tion.Installation work shall be performed in accordance with the technology standard of theelectric installation.