Panasonic WV-CF634 Installation Manual

Also see for WV-CF624: Brochure

Contents

14 About the side cable access holeIf you choose not to drill hole in the wall orceiling, but to wire the camera with the cableexposed, cut the cable access hole on the sideof the dome cover to provide a cable entry.Precautions when wiring from the side:• Remove the dust guard cap. Run the cablethrough the cable access hole and bend itinward, then reinstall the dust guard cap.• Move the cable to one side as shown.• Be careful not to pinch the cable with thedome cover. Installation method of cameraUsing a gang junction box(locally procured)When using a gang junction box (4 inches x2-3/8 inches), procure one locally that meetsthe dimensions in the figure.Next locally procure 2 camera-mounting screwssuitable for the installation surface and structureof the wall/ceiling or gang junction box.1 Attach the gang junction box to the wall orceiling.2 Attach the camera to the gang junction boxwith the 2 screws (locally procured).3 Tighten all mounting screws.Side cableaccess hole83.5 mmScrews(M4, locally procured)Gang junction box(locally procured)Installation mark{3-9/32 inches}