Panasonic WV-CL930 Operating Instructions Manual

Also see for WV-CL930 Series: Product catalog Product catalog Specifications Specifications Operating instructions

Contents

Panasonic WV-CL930 Operating Instructions Manual Manual pdf 29 page image

29Step 1Move the cursor to "AGC" and use right or leftbutton to select "ON" or "OFF".ON (default): Automatically increases thegain to make the screen brighter whenthe illuminance of the subject becomesdarker. The maximum value is adjust-able.OFF: Does not increase the gain. (The nor-mal image remains.)Step 2Move the cursor to "ON" and press the set-ting button to call up the "AGC MAX" screen.Step 3Move the cursor to "LEVEL". The cursor isreversely highlighted.Move the cursor horizontally to adjust thegain with use of the right or left button.Notes:• Change in the level of "AGC MAX" caus-es change in the level of the input signalthat enables electronic sensitivityenhancement when "SENS UP" is set toAUTO and also change in the level of theinput signal that activates black-and-white mode.• If noise is undesirable, adjust the level of"AGC MAX".**CAMERA SETUP** 1/2CAMERA ID OFFALC/ELC ALCSHUTTER OFFAGC ONSENS UP OFFSYNC INTWHITE BAL ATW1MOTION DET OFFDNR HIGHRESOLUTION HIGHBW MODE** AGC MAX **LEVEL ...|...128- +RET TOP END"CAMERA SETUP" screen"AGC MAX" screen4. Gain control setting [AGC]