Panasonic WV-CL934 Operating Instructions Manual

Also see for WV-CL930 Series: Product catalog Product catalog Specifications Specifications Operating instructions

Contents

Panasonic WV-CL934 Operating Instructions Manual Manual pdf 42 page image

42**CAMERA SETUP** 2/2PRIVACY ZONE OFFMIRROR OFFLENS-DRIVE DCSTABILIZER OFFRET TOP END**ZONE NUMBER 1 /8**RET TOP END**ZONE NUMBER 1 /8**POSITION PUSH SWSCALE PUSH SWSET DELRET TOP END12. Privacy zone setting [PRIVACY ZONE]When undesired portions in the camera shooting area (on the screen) exist, those portions (pri-vacy zone) are hidden.ON (1): Grays the zone.ON (2): Mosaics the zone.OFF (default): Displays the zone normally.Up to 8 portions can be specified for the privacy zone. Follow the procedure below for privacyzone setting.Note:The privacy zone function is disabled at initializing the unit, i.e. right after turning on thepower."CAMERA SETUP" screen Zone number selection screen Zone setting screenStep 1Move the cursor to "PRIVACY ZONE", select"ON (1)" or "ON (2)", and press the settingbutton.→ The zone number selection screenappears.Step 2Use the right or left button to select the targetzone number after ascertaining that the cur-sor is present on "1" of "1/8" located at theright side of "ZONE NUMBER". When a zonenumber is marked with "*" at its right side, thezone with the number is already set to theprivacy zone.Step 3Press the setting button after zone numberselection.→ The zone setting screen appears.Notes:• When a zone number that is already setto the privacy zone in Step 2 is selected,the image of the zone is displayed in thezone frame on the zone setting screen.Performing Step 4 and Step 5 clears thesetting zone and implements new zonesetting.• To cancel the zone setting, move the cur-sor to "DEL" and press the setting button.The zone setting is canceled.