Panasonic WV-CLR930 Operating Instructions Manual

Also see for WV-CLR930: Specifications Specifications

Contents

37Adjustment of phase in VS genlock mode (VS)The adjusting video signal of the camera and the criterial external synchronizing input signalare connected to a 2-input oscilloscope and the phase is adjusted. Follow the procedure belowto adjust the phase.**CAMERA SETUP** 1/2CAMERA ID OFFOALC/ELC ALCOSHUTTER OFFAGC ONOSENS UP OFFSYNC INTWHITE BAL ATW1OMOTION DET OFFDNR HIGHRESOLUTION HIGHBW MODEO"CAMERA SETUP" screenStep 1Provide a VS signal to the external synchro-nizing input connector on the rear side of thecamera.→ The "SYNC" setting automaticallychanges to "EXT (VS)".Step 2Move the cursor to "EXT (VS)" and press thesetting button.→ The "SYNC" screen appears.Step 3Connect the video output signal and externalsynchronizing input signal of the camera to a2-input oscilloscope, and move the cursor to"H PHASE".Step 4Adjust the oscilloscope to the horizontal rate,and extend the horizontal synchronizing partof the oscilloscope.Move the cursor horizontally to adjust thehorizontal phase with use of the right or leftbutton.Adjustable range: 0 to –2.0 μs**SYNC**H PHASE ···I···128- +RET TOP END"SYNC" screen